Thermal and electrical behaviour of some hybrid polyimide films containing barium and titanium oxides
- 18 December 2009
- journal article
- research article
- Published by Wiley in Polymer International
- Vol. 59 (5) , 668-675
Abstract
Aromatic polyimides are high‐performance polymers used in applications demanding service at enhanced temperature while maintaining their structural integrity and excellent combination of chemical, physical and mechanical properties. The incorporation of various metallic additives into a polyimide matrix improves its properties, leading to materials required by specific applications. Hybrid polyimide films containing barium and titanium oxides having thicknesses in the range of tens of micrometres were prepared. These films were obtained using the sol–gel technique starting from a poly(amic acid) and a soluble precursor of metal oxides. They exhibited good thermal stability having an initial decomposition temperature above 460 °C, and a glass transition temperature in the range 217–238 °C. Two subglass transitions, γ and β, were evident from dynamic mechanical analysis and dielectric spectroscopy. A study of the thermal and electrical behaviour of some hybrid polyimide films containing barium and titanium oxides is presented. On increasing the concentration of metal oxides, an increase of dielectric constant and a decrease of thermal stability of the hybrid films were observed. The presence of metal oxides shifted the glass transition temperature and the temperature of the β transition to higher values. Copyright © 2009 Society of Chemical IndustryKeywords
Funding Information
- Romanian Ministry of Education and Research
- IDEA-Exploratory Research
This publication has 25 references indexed in Scilit:
- Effect of Curing Conditions on the Fabrication of Zn-oxide Nanoparticles Dispersed in a Polyimide FilmHigh Performance Polymers, 2006
- Structure-Properties Correlation in Polyimide/Silica HybridsHigh Performance Polymers, 2006
- Pendent Polyimides using Mellitic Acid Dianhydride. I. An Atomic Oxygen-resistant, Pendent 4,4′-ODA/PMDA/MADA Co-polyimide Containing ZirconiumHigh Performance Polymers, 2006
- New fluorinated poly(1,3,4-oxadiazole-ether-imide)sPolymer, 2005
- A novel cross-linked polyimide film: synthesis and dielectric propertiesPolymer, 2005
- Comparative study of silicon-containing polyimides from different oxydianilinesJournal of Applied Polymer Science, 2004
- Preparation and properties of polyimide films codoped with barium and titanium oxidesJournal of Applied Polymer Science, 2001
- High‐refractive‐index thin films prepared from aminoalkoxysilane‐capped pyromellitic dianhydride–titania hybrid materialsJournal of Polymer Science Part A: Polymer Chemistry, 2001
- Beta relaxation in polyimidesPolymer, 1992
- Young's modulus and secondary mechanical dispersions in polypromellitimideJournal of Applied Polymer Science, 1969