Slope reliability assessment using an innovative critical failure path approach
Authors:
Open Access
- 9 August 2024
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 12, 1428309
Abstract
Slope instability, driven by factors such as rainfall, seismic activity, and human influence, presents a pervasive hazard worldwide. Timely assessment of slope stability and accurate identification of its most critical slip surface are important for slope safety early warning and management. Currently, for the slope reliability analysis by the strength reduction method (SRM), the critical failure path is approximately determined through visualization techniques, which is not sufficiently precise. Therefore, this study proposes a critical failure search method based on SRM for slope reliability analysis, aiming to accurately identify the critical slip surface. The critical failure path is considered as the path with the maximum plastic dissipative energy density (PDED) and is searched in the constructed weighted graph based on the dissipated energy of the slope. This proposed method is further applied with an engineering slope to find the critical failure path and assess its reliability during and after construction. The searched critical failure path lies within the approximate range obtained through conventional visualization methods. Finally, a reliability prediction model consisting of time, rainfall, and deformation component is further constructed, which allows rapid estimation of the slope reliability through available monitor data. The results of reliability analysis indicate that construction disturbances have a significant impact on slope stability, along with other factors such as rainfall and creep.Keywords
This publication has 38 references indexed in Scilit:
- A Novel Method for Determining the Three-dimensional Roughness of Rock Joints Based on Profile SlicesRock Mechanics and Rock Engineering, 2023
- Numerical Simulation of Water–Silt Inrush Hazard of Fault Rock: A Three-Phase Flow ModelRock Mechanics and Rock Engineering, 2022
- Slope stability analysis by strength reduction method based on average residual displacement increment criterionBulletin of Engineering Geology and the Environment, 2021
- Analysis and assessment of slope instability along international mountainous road in North AfricaNatural Hazards, 2021
- Field investigation and numerical study of a siltstone slope instability induced by excavation and rainfallLandslides, 2020
- Source characteristics and dynamics of the October 2018 Baige landslide revealed by broadband seismogramsLandslides, 2019
- Quantitative risk assessment of slope failure in 2-D spatially variable soils by limit equilibrium methodApplied Mathematical Modelling, 2017
- Functioning and precipitation-displacement modelling of rainfall-induced deep-seated landslides subject to creep deformationLandslides, 2015
- Response Surface Method of Reliability Analysis and its Application in Slope Stability AnalysisGeotechnical and Geological Engineering, 2013
- Some new pre-warning criteria for creep slope failureScience China Technological Sciences, 2011