Conversion‐coating treatment applied to in situ TiB 2p reinforced Al-Si‐alloy composite for corrosion protection
Authors:
- 26 August 2008
- journal article
- research article
- Published by Wiley in Surface and Interface Analysis
- Vol. 40 (10) , 1388-1392
Abstract
In this work, continuous conversion coatings on the surface of in situ TiB 2 particulate reinforced A356 composite were formed successfully by cerium surface treatment for the first time. Scanning electron microscope (SEM) analysis showed that the conversion coatings were inhomogeneous and could be divided into two types of regions, namely, fine crack region and noncrack region. Many cerium‐rich nano‐nodules were uniformly distributed in the whole coatings. Energy dispersive spectroscopy (EDS) analysis testified that the crack coatings mainly covered the interdendritic sites occupied by TiB 2 particulates and Si phases. X‐ray photoelectron spectroscopy (XPS) analysis indicated that the conversion coatings were composed of CeO 2 , Ce 2 O 3 , Ce(OH) 4 , Ce(OH) 3 , and a little amount of Al 2 O 3 . The electrochemical polarization tests showed that the cerium‐conversion treatment markedly improved the corrosion resistance of in situ TiB 2p /A356 composite in chloride environment, and the protection degree of the coatings was superior to that of conventional chromate‐conversion coating. According to these results, the formation mechanism of cerium‐conversion coatings was discussed. Copyright © 2008 John Wiley & Sons, Ltd.Keywords
This publication has 25 references indexed in Scilit:
- Hydrogen permeation behavior and corrosion monitoring of steel in cyclic wet–dry atmospheric environmentMaterials and Corrosion, 2007
- Conversion coating treatment for AZ91 magnesium alloys by a permanganate‐REMS bathMaterials and Corrosion, 2007
- Effective elastic moduli of Al–Si composites reinforced in situ with TiB2 particlesScripta Materialia, 2006
- Effect of Ti on the damping behavior of aluminum composite reinforced with in situ TiB2 particulateScripta Materialia, 2005
- Wear and Corrosion Behaviour of In-Situ Al-TiB2 Metal Matrix CompositesMaterials Science Forum, 2005
- Microstructural and mechanical characteristics of in situ metal matrix compositesMaterials Science and Engineering: R: Reports, 2000
- Aluminum Metal Matrix Composites TodayMaterials Science Forum, 2000
- In situ preparation of TiB2 reinforced Al based compositesJournal of Materials Processing Technology, 1998
- Influence of Processing Variables on the Corrosion Susceptibility of Metal-Matrix CompositesCorrosion, 1988
- Auger and XPS studies of cerium corrosion inhibition on 7075 aluminum alloyApplied Surface Science, 1985