Electrochemical Precipitation of Struvite
Authors:
- 1 January 2006
- journal article
- Published by The Electrochemical Society in Electrochemical and Solid-State Letters
- Vol. 9 (6) , C97-C101
Abstract
Pure struvite (magnesium ammonium phosphate hexahydrate) layers were deposited by an electrochemical method, from an aqueous solution containing phosphate, ammonium, and magnesium ions. According to interfacial pH measurements, it was shown that the process is governed by a strong pH increase in the vicinity of the cathodic plate, due to the electrochemical reduction of oxygen and/or water molecules. The composition, the structure, and the morphology of the struvite layers were characterized by EDX analysis, X-ray diffraction, and Raman spectroscopy. Struvite electrochemical precipitation appears as an alternative method to recover P, N, and Mg from waste waters.Keywords
This publication has 25 references indexed in Scilit:
- Study of Electrochemical Deposition of CaCO[sub 3] by In Situ Raman SpectroscopyJournal of the Electrochemical Society, 2003
- Influence of the Interfacial pH on Electrochemical CaCO[sub 3] PrecipitationJournal of the Electrochemical Society, 2003
- Nucleation and growth of calcium carbonate by an electrochemical scaling processJournal of Crystal Growth, 1999
- Predicting struvite formation in digestionWater Research, 1998
- Phosphate removal in real anaerobic supernatants: modelling and performance of a fluidized bed reactorWater Science & Technology, 1998
- The challenge of managing water and material balances in relation to eutrophicationWater Science & Technology, 1998
- Interfacial pH measurement during the reduction of dissolved oxygen in a submerged impinging jet cellJournal of Applied Electrochemistry, 1997
- Cathodic electrodeposition from aqueous solution of dense or open‐structured zinc oxide filmsAdvanced Materials, 1996
- Thermodynamics of Struvite FormationTransactions of the ASAE, 1994
- Struvite deposits in pipes and aeratorsBiological Wastes, 1989