New Correlations for Two Phase Flow Pressure Drop in Homogeneous Flows Model
Authors:
- 27 February 2020
- journal article
- research article
- Published by Pleiades Publishing Ltd in Thermal Engineering
- Vol. 67 (2) , 92-105
Abstract
The calculation of pressure drop in pipes two-phase flow is essential in different areas. Even though several studies concerning this issue have been conducted, an accurate correlation is still required. The objective of the paper is to develop correlations for two-phase friction pressure drop and mixture viscosity. The new correlation can be used to compute the friction pressure drop for two phase flow in homogenous approach modeling. The original equation is generated from a similitude between the mixture viscosity for two-phase flows and the thermal conductivity of the porous structure. The new correlation is evaluated against 846 experimental data of friction pressure drop collected from literature on circular pipes; the experimental data including different working fluids such as R1234ze (E), R32, R-600a R717, R134a, R410A and carbon dioxide (CO2) at different hydraulic inner diameters and mass flux. Models are assessed based on the relative percentage error and the probability density function (PDF). The predictions by the new correlation and other correlations from the literature are compared based on some experimental data. It is found that new correlation has a mean absolute relative deviation (MARD) of 30%. It is proved that these new correlations of two-phase flow pressure drop can be used to predict the experiment measurements of pressure drop, on circular pipes, minichannels and microchannels.Keywords
This publication has 59 references indexed in Scilit:
- Comparative investigations of the condensation of R134a and R404A refrigerants in pipe minichannelsInternational Journal of Heat and Mass Transfer, 2011
- A general correlation for adiabatic two-phase pressure drop in micro/mini-channelsInternational Journal of Heat and Mass Transfer, 2010
- Comparison of frictional pressure drop models during annular flow condensation of R600a in a horizontal tube at low mass flux and of R134a in a vertical tube at high mass fluxInternational Journal of Heat and Mass Transfer, 2010
- Asymptotic Generalizations of the Lockhart–Martinelli Method for Two Phase FlowsJournal of Fluids Engineering, 2010
- Representative Results for Condensation Measurements at Hydraulic Diameters ∼100 MicronsJournal of Heat Transfer, 2010
- Correlations of two-phase frictional pressure drop and void fraction in mini-channelInternational Journal of Heat and Mass Transfer, 2010
- The pressure drop in microtubes and the correlation developmentInternational Journal of Heat and Mass Transfer, 2006
- Condensation heat transfer and pressure drop of refrigerant R-134a in a small pipeInternational Journal of Heat and Mass Transfer, 1999
- A simple friction pressure drop correlation for two-phase flow in pipesChemical Engineering and Processing - Process Intensification, 1986
- A theoretical basis for the Lockhart-Martinelli correlation for two-phase flowInternational Journal of Heat and Mass Transfer, 1967