A Novel Solution to the Inverse Kinematics Problem of General 7R Robots
Open Access
- 20 June 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 67451-67469
Abstract
Task and Motion Planning for a 7-DOF serial robot containing only revolute joints needs a fast and numerically stable inverse kinematics solution. The analytical methods are real-time, but they are robot dependent. Although the numerical methods based on inverse differential kinematics can solve the inverse kinematics problem (IKP) of 7R robots with arbitrary geometric parameters, their numerical stability is insufficient. Moreover, it is time-consuming for them to converge to a single solution that depends on the initial guess. The main innovation of this article is the development of a practical method for solving the IKP of general 7R robots. The proposed method can find multiple solutions and is also faster than the numerical method. It combines symbolic preprocessing, Sylvester dialytic elimination, and eigendecomposition. First, according to the Denavit-Hartenberg convention of geometric representation, a general kinematics model of a 7R manipulator is established. Secondly, the joint variables are separated by symbolic preprocessing, and then two symbolic matrices are obtained. After numerical substitution, a square matrix of polynomial coefficients is computed through Gaussian and Sylvester dialytic elimination. Finally, utilizing the eigendecomposition of the matrix restructured from the square matrix, the values of some variables are obtained, and then the remaining variables are solved by back-substitution. The simulation and experimental data are analyzed. The comparison results verify that the proposed method applies to solving the IKP of general 7R robots and is almost real-time, effective, and numerically stable.Keywords
Funding Information
- National Key Research and Development Program of China (2019YFB1310201)
This publication has 63 references indexed in Scilit:
- A neuro-simulated annealing approach to the inverse kinematics solution of redundant robotic manipulatorsEngineering with Computers, 2012
- Path Planning of Mobile Elastic Robotic Arms by Indirect Approach of Optimal ControlInternational Journal of Advanced Robotic Systems, 2011
- Selectively Damped Least Squares for Inverse KinematicsJournal of Graphics Tools, 2005
- Application of genetic algorithms to point-to-point motion of redundant manipulatorsMechanism and Machine Theory, 1996
- Inverse Kinematics of the General 6R Manipulator and Related LinkagesJournal of Mechanical Design, 1993
- Closed-Loop Inverse Kinematics Schemes for Constrained Redundant Manipulators with Task Space Augmentation and Task Priority StrategyThe International Journal of Robotics Research, 1991
- Real-time implementation of an optimization scheme for seven-degree-of-freedom redundant manipulatorsIEEE Transactions on Robotics and Automation, 1991
- Configuration control of redundant manipulators: theory and implementationIEEE Transactions on Robotics and Automation, 1989
- The evaluation of the zeros of ill-conditioned polynomials. Part IINumerische Mathematik, 1959
- The evaluation of the zeros of ill-conditioned polynomials. Part INumerische Mathematik, 1959