Tuning Cation Disorder in LiNi 0 . 5 Mn 1 . 5 O 4 via Room Temperature Continuous‐Flow Co‐Precipitation and Controlled Heat Treatment
Open Access
- 5 August 2026
- journal article
- Published by Wiley in Energy & Environmental Materials
Abstract
A room temperature, continuous coprecipitation process with in‐line dynamic mixing (ACTIM) was used to synthesize a precursor (up to 0.42 kg h −1 ) to the high‐voltage cathode LiNi 0 . 5 Mn 1 . 5 O 4 (LNMO), consuming ~39% less energy at the coprecipitation step than a more conventional batch synthesis route. The coprecipitate was lithiated in air via a two‐step heat treatment (500 °C/5 h and then 850 °C/12 h), followed by a third treatment at 650, 700 or 750 °C to tune cation disorder. X‐ray Photoelectron Spectroscopy (XPS) gave surface Mn 3+ fractions of ca. 38, 46 and 53% for the 650, 700 and 750 °C samples, respectively, with (Mn K‐edge) X‐ray Absorption Spectroscopy (XAS) indicating the same trend in the bulk. The 750 °C sample under electrochemical testing, delivered a specific capacity of 124, 116 and 81 mAh g −1 at 0.1, 1 and 5 C, respectively. Furthermore, adding 2.5 wt % multi‐walled carbon nanotubes (MWCNTs) to the electrode raised the rate capability to 98 mAh g −1 at 5 C and 91 mAh g −1 at 10 C, with 98.4% capacity retention after 100 cycles at a 1 C current rate. The primary contribution of this work lies in demonstrating that a scalable, ambient temperature, energy‐efficient continuous‐flow coprecipitation process can produce LNMO cathodes with tunable disorder‐related characteristics.Keywords
Funding Information
- UK Research and Innovation (101069756 HORIZON‐CL5‐2021‐D2‐01)
This publication has 63 references indexed in Scilit:
- Flash Synthesis of High‐Performance Sub‐Micron Low‐Disorder LiNi
x
Co
y
Al
z
O 2 Cathode Single CrystalsAdvanced Energy and Sustainability Research, 2025
- Navigating the Carbon Maze: A Roadmap to Effective Carbon Conductive Networks for Lithium‐Ion BatteriesAdvanced Energy Materials, 2024
- Understanding the Role of Lithium Borate as the Surface Coating on High Voltage Single Crystal LiNi0.5Mn1.5O4Advanced Functional Materials, 2023
- On the Composition of LiNi0.5Mn1.5O4 Cathode Active MaterialsAdvanced Energy Materials, 2023
- Direct Observation of Li‐Ion Transport Heterogeneity Induced by Nanoscale Phase Separation in Li‐rich Cathodes of Solid‐State BatteriesAngewandte Chemie International Edition, 2022
- Tailoring Disordered/Ordered Phases to Revisit the Degradation Mechanism of High‐Voltage LiNi0.5Mn1.5O4 Spinel Cathode MaterialsAdvanced Functional Materials, 2022
- Recent Progress and Perspective of Advanced High‐Energy Co‐Less Ni‐Rich Cathodes for Li‐Ion Batteries: Yesterday, Today, and TomorrowAdvanced Energy Materials, 2020
- Atomic Insights into the Enhanced Surface Stability in High Voltage Cathode Materials by Ultrathin CoatingAdvanced Functional Materials, 2017
- Electrospun Spinel LiNi0.5Mn1.5O4 Hierarchical Nanofibers as 5 V Cathode Materials for Lithium‐Ion BatteriesChempluschem, 2013
- Scaling up of silverson rotor–stator mixersThe Canadian Journal of Chemical Engineering, 2011