The Role of Molar Mass in Achieving Isotropy and Inter-Layer Strength in Mat-Ex Printed Polylactic Acid
Open Access
Abstract
There has been extensive research in the field of material-extrusion (Mat-Ex) 3D printing to improve the inter-layer bonding process. Much research focusses on how various printing conditions may be detrimental to weld strength; many different feedstocks have been investigated along with various additives to improve strength. Surprisingly, there has been little attention directed toward how fundamental molecular properties of the feedstock, in particular the average molar mass of the polymer, may contribute to microstructure of the weld. Here we showed that weld strength increases with decreasing average molar mass, contrary to common observations in specimens processed in more traditional ways, e.g., by compression molding. Using a combination of synchrotron infra-red polarisation modulation microspectroscopy measurements and continuum modelling, we demonstrated how residual molecular anisotropy in the weld region leads to poor strength and how it can be eradicated by decreasing the relaxation time of the polymer. This is achieved more effectively by reducing the molar mass than by the usual approach of attempting to govern the temperature in this hard to control non-isothermal process. Thus, we propose that molar mass of the polymer feedstock should be considered as a key control parameter for achieving high weld strength in Mat-Ex.Keywords
This publication has 43 references indexed in Scilit:
- Developments in construction-scale additive manufacturing processesAutomation in Construction, 2012
- 3D printing based on imaging data: review of medical applicationsInternational Journal of Computer Assisted Radiology and Surgery, 2010
- Effect of processing conditions on the bonding quality of FDM polymer filamentsRapid Prototyping Journal, 2008
- Microspectroscopic observation of vibrational linear dichroism using polarization-modulated infrared synchrotron radiationInfrared Physics & Technology, 2006
- Anisotropic material properties of fused deposition modeling ABSRapid Prototyping Journal, 2002
- Healing of Thermoplastic Polymers at an Interface under Nonisothermal ConditionsMacromolecules, 2002
- Vibrational analysis of poly(L‐lactic acid)Journal of Raman Spectroscopy, 1995
- Continuum and Discrete Modeling of Craze Failure at a Crack Tip in a Glassy PolymerMacromolecules, 1995
- Influence of molecular weight and molecular weight distribution on the tensile properties of amorphous polymersJournal of Applied Polymer Science, 1990
- Mechanical Properties of Polymers: The Influence of Molecular Weight and Molecular Weight DistributionJournal of Macromolecular Science, Part C: Polymer Reviews, 1972