Thermal Convection Loop Study of the Corrosion of Incoloy 800 in Molten NaNO3-KNO3
Author:
- 1 March 1987
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 43 (3) , 173-178
Abstract
The corrosion behavior of Incoloy 800 was studied using a thermal convection loop that operated between the temperatures of 300 and 600 C for 5000 h. The extent of corrosion of the removable test coupons was determined by chemical descaling, which indicated a maximum loss of ~5 μm at 600 C during the course of the experiment. The morphologies of corrosion products were examined by electron microprobe analysis (EMA) and x-ray diffraction (XRD) and found to consist primarily of Fe3O4 and Fe(Fe,Cr)2O4 over most of the temperature range. At temperatures near 600 C, however, complex multilayer scales were observed that consisted of two magnetite spinels, a Cr-rich M2O3 oxide, subsurface oxide penetration, precipitation of metallic nickel, and internal nitridation. Other observations are reported concerning the occurrence of accelerated oxide penetration on unabraded surfaces of Incoloy 800 tubing and pitting at temperatures below 400 C, at which only very thin oxide layers are formed. Although chromium was selectively removed from the alloy and dissolved in the melt, its depletion was a secondary mechanism of metal loss. A mass balance demonstrated that thermal gradient mass transfer of chromium was negligible.Keywords
This publication has 10 references indexed in Scilit:
- The effect of a molten nitrate salt environment on the mechanical properties of INCOLOY alloy 800Journal of Materials for Energy Systems, 1983
- Materials issues in solar thermal energy systemsSolar Energy Materials, 1981
- Survey of Power Tower TechnologyJournal of Solar Energy Engineering, 1980
- The high temperature oxidation behaviour of austenitic stainless steelsMaterials and Corrosion, 1978
- Potentiometric acid-base titrations in molten salts—IV. Basic character of some oxide-ion donors in molten KNO3: their reaction with NaPO3 and K2Cr2O7Electrochimica Acta, 1968
- Dimolybdate and dichromate formation in fused equimolar sodium nitrate-potassium nitrate solventInorganic Chemistry, 1967
- Molten lithium-potassium nitrate eutectic: The reactions of some compounds of chromiumInorganica Chimica Acta, 1967
- Corrosion Behavior of Steels and Nickel Alloys in Superheated SteamCorrosion, 1966
- Effect of Surface Treatment on the Corrosion of Stainless Steels in High-Temperature Water and SteamJournal of the Electrochemical Society, 1965
- Acid-Base Reactions in Fused Salts. I. The Dichromate-Nitrate ReactionJournal of the American Chemical Society, 1958