The Fatigue Behavior of Fastener Joints
Authors:
- C. GomezCGC. Gomez
- 19 August 2008
- journal article
- Published by SAE International in SAE International Journal of Aerospace
- Vol. 01 (1) , 675-684
Abstract
The fatigue behavior of Hilok fastener joints under constant amplitude loading has been investigated experimentally. The effects of load transfer in an unbalanced joint configuration was characterized in terms of a stress severity factor relative to the open-hole configuration. The experimental data indicates that the clamp-up forces dominate the performance of fastener joints with the open-hole fatigue life being the lower bound at the stress levels investigated. The failure modes were observed to transition from a net-section type failure across the minimum section to a fretting induced failure at some distance from the hole. The experimental data has been used to develop stress severity factors to be used as a measure of the fatigue quality of the fastener joints.Keywords
This publication has 4 references indexed in Scilit:
- Fatigue behaviour of mechanically fastened aluminium joints tested in spectrum loadingInternational Journal of Fatigue, 2004
- Effect of Load Transfer on Fatigue of Mechanically Fastened Metallic Joints1986
- Stresses and displacements due to load transfer by fasteners in structural assembliesEngineering Fracture Mechanics, 1978
- Cumulative Damage in FatigueJournal of Applied Mechanics, 1945