Characterization of dissipation factors in terms of piezoelectric equivalent circuit parameters
Authors:
- Yu ChenYCYu Chen
- Yumei WenYWYumei Wen
- Ping LiPLPing Li
- 26 December 2006
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 53 (12) , 2367-2375
Abstract
The equivalent circuit of a piezoelectric ceramic is established composed of the equivalent circuit parameters derived from the complex materials coefficients. The equivalent circuit parameters are connected to real and imaginary parts of the complex materials coefficients of the piezoelectric ceramics. With respect to the definition of dissipation factors, the dielectric, elastic, and piezoelectric dissipation factors which represent the losses in the materials are thus expressed through the equivalent circuit parameters. In temperature and stress experiments, by measuring the equivalent circuit parameters during the process of the temperature and stress changes, three dissipation factors are computed. Compared with the results of other previous research, a similar increase of the elastic dissipation factor with stress is observed. Moreover, it is also found that the elastic dissipation factor reaches its saturation over a stress level of about 10 MPa. The responses of dissipation factors in lower temperature (-30degC to 20degC) are studiedKeywords
This publication has 17 references indexed in Scilit:
- Loss mechanisms in piezoelectrics: how to measure different losses separatelyIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2001
- Automatic iterative evaluation of complex material constants in piezoelectric ceramicsJournal of Physics D: Applied Physics, 1994
- Accurate evaluation of the real and imaginary material constants for a piezoelectric resonator in the radial modeFerroelectrics, 1991
- An equivalent electric circuit of a piezoelectric bar resonator with a large piezoelectric phase angleFerroelectrics, 1990
- High accuracy determination of real and imaginary parts of elastic, piezoelectric and dielectric constants of ferroelectric PLZT (11/55/45) ceramics with iterative methodFerroelectrics, 1985
- Electrical and mechanical losses in ferroelectric ceramicsCeramics International, 1982
- Stress Sensitivity of Piezoelectric Ceramics: Part 1. Sensitivity to Compressive Stress Parallel to the Polar AxisThe Journal of the Acoustical Society of America, 1967
- Representation of Dielectric, Elastic, and Piezoelectric Losses by Complex CoefficientsIEEE Transactions on Sonics and Ultrasonics, 1967
- Equivalent Electrical Circuits of the Quartz Crystal Transducer for Analysis of Ultrasonic SystemsIRE Transactions on Ultrasonic Engineering, 1962
- Domain Processes in Lead Titanate Zirconate and Barium Titanate CeramicsJournal of Applied Physics, 1959