Alkali activation of a high MgO GGBS – fresh and hardened properties
- 1 December 2018
- journal article
- research article
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 70 (24) , 1256-1264
Abstract
In this study, concretes and pastes were produced from a high magnesium oxide (MgO) ground granulated blast furnace slag (magnesium oxide content 16·1 wt%) by alkali activation with various amounts and combinations of sodium carbonate and sodium silicate. Sodium carbonate activators tended to reduce slump compared to sodium silicate at the same dose, and, in contrast to the literature for many blast furnace slags with more moderate magnesium oxide, to shorten the initial and final setting times in comparison with concretes activated by sodium silicate for dosages less than 10 wt%. Higher heat curing temperatures and the use of larger dosages of alkali activators resulted in higher early-age compressive cube strength values. The X-ray diffraction analysis of 7 and 28 d old pastes activated with sodium carbonates revealed formation of gaylussite, calcite, nahcolite and calcium-aluminium-silicate-hydrate (C–A–S–H) gel. Curing at 20°C appeared to promote dissolution of gaylussite and calcite, while heat curing promoted their replacement with C–A–S–H, which also resulted in higher ultimate cube compressive strength values. Conversely, mixes activated with sodium silicate contained less crystalline phases and more disordered gel, which strengthened the binder matrix.Keywords
This publication has 34 references indexed in Scilit:
- Advances in near-neutral salts activation of blast furnace slagsRILEM Technical Letters, 2016
- Alkali-activated slag cements produced with a blended sodium carbonate/sodium silicate activatorAdvances in Cement Research, 2016
- Role of carbonates in the chemical evolution of sodium carbonate-activated slag bindersMaterials and Structures, 2014
- Durability of Alkali‐Activated Materials: Progress and PerspectivesJournal of the American Ceramic Society, 2014
- Effect of binder content on the performance of alkali-activated slag concretesCement and Concrete Research, 2011
- A study on the setting characteristics of sodium silicate-activated slag pastesCement and Concrete Research, 2003
- Sodium silicate-based, alkali-activated slag mortarsCement and Concrete Research, 2002
- Effect of elevated temperature curing on properties of alkali-activated slag concreteCement and Concrete Research, 1999
- Alkali activation of Australian slag cementsCement and Concrete Research, 1999
- Early Age Strength and Workability of Slag Pastes Activated by NaOH and Na2CO3Cement and Concrete Research, 1998