Influence of hydrogen content in working gas on growth kinetics of hardened layer at ion nitriding of 16MnCr5 and A290C1M steels
Authors:
Open Access
- 17 July 2018
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 387 (1) , 012034
Abstract
The impact of hydrogen content from 10 to 30% in the mixture of operating gas environment on the growth kinetics and structure of a hardened layer during ion nitriding of martensite and pearlite steels has been studied. It is stated that hydrogen in the vacuum chamber in the range from 10 to 30% contributed to a 1.2-time increase of nitrogen diffusion rate in 16MnCr5 steel and 1.3-time increase in A290C1M steel. The dependence of the hardened layer thickness and microhardness distribution over the depth on the gas environment composition is stated. The structure of the nitrided layer of steels at different hydrogen contents during ion nitriding is studied.Keywords
This publication has 8 references indexed in Scilit:
- Influence of hydrogen content in working gas on diffusion processes at ion nitriding of martensitic and austenitic steelsJournal of Physics: Conference Series, 2017
- Formation features of structure-phase states of Cr–Nb–C–V containing coatings on martensitic steelJournal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques, 2016
- Effects of strain rate on the hot deformation behavior and dynamic recrystallization in China low activation martensitic steelFusion Engineering and Design, 2016
- Microstructure and wear properties of AISI M2 tool steel on RF plasma nitriding at different N2–H2 gas compositionsSurface and Coatings Technology, 2014
- Plasma nitriding using high H2 content gas mixtures for a cavitation erosion resistant steelApplied Surface Science, 2013
- Formation of surface gradient structural-phase states under electron-beam treatment of stainless steelJournal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques, 2011
- Influence of contact potential difference and electric potential on the microhardness of metalsPhysics of the Solid State, 2009
- On the hydrogen etching mechanism in plasma nitriding of metalsApplied Surface Science, 2006