Human Sensing in Reverberant Environments: RF-Based Occupancy and Fall Detection in Ships
- 29 March 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 70 (5) , 4512-4522
Abstract
In this paper, we explore the possibility of estimating the number of people inside a below-deck ship compartment using the theory of room electromagnetics. Most RF-based occupancy detection solutions focus on residential environments. Confined metallic spaces such in industrial environments are more hostile and exhibit features of a reverberant cavity. The theory of room electromagnetics provides a simple characterization of microwave propagation in such environments. By considering the indoor environment as a lossy cavity, the exponential decay rate of the power-delay profile (PDP), also known as reverberation time (RT), is related to the total absorption inside the room. First, we verify the reverberating nature of the room by measuring the RT at different locations inside the room. The PDPs are calculated from the channel impulse response (CIR) measured using the MIMOSA radio channel sounder. Then, the relation between RT and the number of people inside the room is investigated. We show that it is possible to estimate the number of stationary people with a good accuracy, depending on the number of antennas used. With a success rate of 88%, the estimation error is only one person when 16 spatially averaged PDPs are used. Higher success rates are achievable with more spatial averaging. Moreover, off-the-shelf (OTS) ultra wide band (UWB) devices are used to estimate the number of people inside the same room. Results show that temporal averaging of PDPs can further improve the success rate to 95% when people inside the room are moving. In addition, the detection of a lone person falling to the ground is investigated based on the Doppler analysis of the measured CIRs. It is shown that the Doppler spread in case of a fall has higher peak values compared to normal activities, such as walking and sitting. With the use of a simple Bayes classifier, a fall is detected with 98% accuracy and 100% sensitivity.Keywords
Funding Information
- Internet-of-Shipping
- IMEC
- Agentschap Innoveren en Ondernemen
This publication has 25 references indexed in Scilit:
- Radar and RGB-Depth Sensors for Fall Detection: A ReviewIEEE Sensors Journal, 2017
- Effects of range spread and aspect angle on radar fall detection2016
- RT-Fall: A Real-Time and Contactless Fall Detection System with Commodity WiFi DevicesIEEE Transactions on Mobile Computing, 2016
- WiFall: Device-Free Fall Detection by Wireless NetworksIEEE Transactions on Mobile Computing, 2016
- An Empirical Study on the Performance of Wireless OFDM Communications in Highly Reverberant EnvironmentsIEEE Transactions on Wireless Communications, 2016
- Flexible real-time MIMO channel sounder for multidimensional polarimetric parameter estimation2015
- Experimental Validation of the Reverberation Effect in Room ElectromagneticsIEEE Transactions on Antennas and Propagation, 2015
- Measurement of Head Impact Due to Standing Fall in Adults Using Anthropomorphic Test DummiesAnnals of Biomedical Engineering, 2015
- Assessing Whole-Body Absorption Cross Section For Diffuse Exposure From Reverberation Chamber MeasurementsIEEE Transactions on Electromagnetic Compatibility, 2014
- Optimal placement of training for frequency-selective block-fading channelsIEEE Transactions on Information Theory, 2002