Fabrication of dye-sensitized solar cells with TiO2 photoelectrode prepared by sol-gel technique with low annealing temperature
- 30 June 2009
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 27 (4) , 1042-1046
Abstract
Transparent titanium oxide ( Ti O 2 ) photoelectrodes for dye-sensitized solar cells (DSCs) were deposited on fluorine doped tin oxide substrate by a sol-gel dip coating technique with acetic acid as an acid catalyst, where crystallinity can be achieved at a relatively low annealing temperature. Repetitive dip coating and drying, with two intermediate annealing, has made this technique easier to prepare Ti O 2 thin film with desired thickness within a short period of time. The Ti O 2 photoelectrodes were annealed at various temperatures to study the effect of annealing temperature on the photovoltaic property of the DSCs. The structure of the Ti O 2 films, prepared at various annealing temperatures, shows different crystallinities. Good crystallinity has been observed for 300 ° C annealing temperature and it improved with increasing annealing temperature. The surface morphology, investigated by field emission scanning electron microscope and atomic force microscope measurements, revealed that with the increase in annealing temperature, the surface of Ti O 2 photoelectrode showed more porous structure with higher roughness. The DSCs with Ti O 2 photoelectrode, annealed at 300 ° C , showed the best photovoltaic characteristics among the three samples of investigation. Measurement of optical properties and incident photon-to-current conversion efficiency indicated the maximum dye incorporation in Ti O 2 electrode, deposited at 300 ° C . The solar cell efficiency and fill factor of this above mentioned sample are 0.96% and 46.3%, respectively. The results indicate a strong correlation between the microstructure, dye absorption, and photovoltaic property of the sample.Keywords
This publication has 15 references indexed in Scilit:
- Recent improvements and arising challenges in dye-sensitized solar cellsSolar Energy Materials and Solar Cells, 2007
- A review on mass transport in dye-sensitized nanocrystalline solar cellsJournal of Photochemistry and Photobiology C: Photochemistry Reviews, 2006
- Minimisation of the cost of generated electricity from dye-sensitised solar cells using numerical analysisSolar Energy Materials and Solar Cells, 2005
- Conversion of sunlight to electric power by nanocrystalline dye-sensitized solar cellsJournal of Photochemistry and Photobiology A: Chemistry, 2004
- Dye-sensitized solar cellsJournal of Photochemistry and Photobiology C: Photochemistry Reviews, 2003
- Assessment of the dye-sensitized solar cellRenewable and Sustainable Energy Reviews, 2002
- Sol−Gel Template Synthesis of Semiconductor NanostructuresChemistry of Materials, 1997
- Nanomaterials: A Membrane-Based Synthetic ApproachScience, 1994
- Conversion of light to electricity by cis-X2bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X = Cl-, Br-, I-, CN-, and SCN-) on nanocrystalline titanium dioxide electrodesJournal of the American Chemical Society, 1993
- A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 filmsNature, 1991