Abstract
The construction industry is directly linked to a country's economic growth, both in terms of job creation and housing development, and consumes various types of materials, generating a significant amount of waste. The aim of this study is to evaluate non-structural concrete blocks with the incorporation of cementitious waste from the manufacture of blocks, assessing its practical and feasible application in the production of new blocks. The research began with the characterization of the block constituent materials: sand, stone dust, gravel and waste. The concrete mixes were defined based on particle packing using Alfred's method and unit weight, with the aim of maximizing its mechanical performance and minimizing the environmental impact caused by the excessive use of non-renewable materials. As a result, four distinct concrete mixes were defined, a reference mix, and mixes containing 0%, 3%, and 5% cementitious waste, respectively. The blocks were produced in the industry and taken to the laboratory. The block properties, compressive strength, water absorption, dimensional analysis and shrinkage were evaluated. The compressive strength ranged from 5.16 MPa to 5.99 MPa and the water absorption ranged from 6.40% to 7.29%. The drying shrinkage of the blocks ranged from 0.040% to 0.110%, with the mixes containing waste showing results within and above the normative limit of 0.065%, according to the dosage. The incorporation of cementitious waste into concrete blocks for non-structural masonry is feasible at the industrial level without significant reduction on its properties when compared to concrete without incorporation. The best design mix is the one with 5%-waste incorporation, considering the overall performance across all evaluated properties.
Funding Information
  • FAPESP (2022/12239-7)

This publication has 6 references indexed in Scilit: