Numerical Study of Solid Oxide Fuel Cell Contacting Mechanics
Open Access
- 2 February 2018
- journal article
- research article
- Published by Wiley in Fuel Cells
- Vol. 18 (1) , 42-50
Abstract
Assembly of a planar solid oxide fuel cell (SOFC) or solid electrolyzer (SOE) stack involves the lamination of cells and interconnect plates under an applied load. In most designs a pattern of ribs on the interconnector makes contact with a porous ceramic current collector layer on the air side. These localized contacts are regions of increased stress on the cells and can cause damage if the stresses become too large. In this paper the mechanical response of an anode‐supported cell to localized loads from interconnector ribs is simulated. The simulations show that the critical stress for initiating and propagating a crack in the electrolyte (∼300MPa for a 10 μm thick electrolyte) is reached when the interconnector displacement reaches 20 μm (after touching the cathode) with reduced support, or 30 μm when in an oxidized state. The difference is due to the lower stiffness of the reduced support. The residual compressive stress in the electrolyte layer has a major protective effect for the electrolyte. It is concluded that fracture is very unlikely for a geometrically perfect contact, but if the contact is non‐uniform due to manufacturing variability in the contact plate or cell, local displacements >∼20 μm can be dangerous. The simulations are used in an example of contacting geometry optimization.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/J016454/1, EP/M014045/1)
This publication has 13 references indexed in Scilit:
- Spherical indentation of bilayer ceramic structures: Dense layer on porous substrateJournal of the European Ceramic Society, 2017
- Analysis of spherical indentation of porous ceramic filmsJournal of the European Ceramic Society, 2017
- An Analysis of Contact Problems in Solid Oxide Fuel Cell Stacks Arising from Differences in Thermal Expansion CoefficientsElectrochimica Acta, 2017
- Spherical indentation of porous ceramics: Elasticity and hardnessJournal of the European Ceramic Society, 2016
- Recent results in Jülich solid oxide fuel cell technology developmentJournal of Power Sources, 2013
- SOFC Sealing with Thermiculite 866 and Thermiculite 866 LSECS Transactions, 2013
- Nanoindentation of porous bulk and thin films of La0.6Sr0.4Co0.2Fe0.8O3−δActa Materialia, 2013
- Effect of Thermal Cycling on Residual Stress and Curvature of Anode‐Supported SOFCsFuel Cells, 2009
- Residual stresses in planar solid oxide fuel cellsJournal of Power Sources, 2005
- Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile MediaJournal of Engineering Materials and Technology, 1977