Experimental and numerical investigations on hysteretic response of a multi-level SMA/lead rubber bearing seismic isolation system
- 9 February 2022
- journal article
- research article
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 31 (3) , 035024
Abstract
This study investigates the response of a shape memory alloy (SMA)-based isolation system that combines multiple groups of SMA cables and a lead rubber bearing (LRB). The isolation device, named as multi-level SMA/lead rubber bearing (ML-SLRB), is designed such that it maintains its efficiency under frequent, design and extreme levels of seismic events. Two large-size ML-SLRB isolation devices were designed and fabricated. The response of the proposed isolation systems was evaluated together with a conventional LRB under increasing amplitudes of cyclic loads. The effects of loading rate and vertical pressure on the response of the ML-SLRB isolator were evaluated. Finite element models of the fabricated ML-SLRB isolators were developed and analyzed to assess the response of the different SMA cable groups at different stages of the loading. The test results, supported by the finite element analyses, revealed that the SMA cable groups used in a loop configuration in the ML-SLRB isolator are prone to stress concentrations and early damage. The ML-SLRB isolators that employed its main SMA cable groups in a straight configuration successfully achieved a multi-level performance where the stiffness of the isolator increased as the demands of the displacement increased. The developed isolator also exhibited lower residual drifts compared to the LRB isolator.Keywords
Funding Information
- National Natural Science Foundation of China (51278134)
- Institute of Engineering Mechanics, China Earthquake Administration (2019D19)
- Natural Science Foundation
- Guangdong Province (2020A1515010231)
This publication has 46 references indexed in Scilit:
- Shape memory alloy wire-based smart natural rubber bearingSmart Materials and Structures, 2013
- Seismic Response Control Using Shape Memory Alloys: A ReviewJournal of Intelligent Material Systems and Structures, 2011
- Seismic assessment of bridge structures isolated by a shape memory alloy/rubber-based isolation systemSmart Materials and Structures, 2010
- Smart restorable sliding base isolation systemBulletin of Earthquake Engineering, 2010
- Comparison Between Two SMA Constitutive Models for Seismic ApplicationsJournal of Vibration and Control, 2010
- Evaluation of the performance of a sliding-type base isolation system with a NiTi shape memory alloy device considering temperature effectsEngineering Structures, 2010
- A passive control device with SMA components: from the prototype to the modelStructural Control and Health Monitoring, 2009
- Numerical simulation of superelastic shape memory alloys subjected to dynamic loadsSmart Materials and Structures, 2008
- An isolation bearing for highway bridges using shape memory alloysMaterials Science and Engineering: A, 2006
- Shape-memory alloys: modelling and numerical simulations of the finite-strain superelastic behaviorComputer Methods in Applied Mechanics and Engineering, 1997