Method Development and Optimisation of Sodium Peroxide Sintering for Geological Samples
- 31 October 2016
- journal article
- research article
- Published by Wiley in Geostandards and Geoanalytical Research
- Vol. 41 (2) , 181-195
Abstract
This work provides a measurement procedure for the complete digestion of rock samples containing refractory minerals such as zircon and chromite. Their dissolution by wet acid digestion is often incomplete but, although providing complete digestions, alkali fusion techniques can result in solutions with a high blank and total dissolved solid content. It was established by the systematic study with reference material trachyandesite MTA‐1 that a 1:6 sample to sodium peroxide (Na2O2) ratio is conservative for the complete digestion and recovery of all the analytes especially those contained in zircon. The sample decomposition time was 120 min for the zircon‐bearing rhyolite reference material MRH‐1. Complete digestion of chromite was obtained in the harzburgite RM MUH‐1. The sample solutions were stable for at least 1 year. Accurate measurements of SiO2, Al2O3, TiO2, P2O5 and K2O could be made with ICP‐MS by not discarding the supernatant of the sinter solution and by using geological reference materials for external calibration. HF digestions are slow, not universal, and may form new mineral/phases that are insoluble under high temperature conditions. The validated sample decomposition procedure combined with ICP‐MS presents an alternative to the use of HF in routine analysis of difficult to digest geological materials.Keywords
This publication has 41 references indexed in Scilit:
- The future demand for geological reference materialsAccreditation and Quality Assurance, 2011
- Classical and New Procedures of Whole Rock Dissolution for Trace Element Determination by ICP‐MSGeostandards and Geoanalytical Research, 2011
- Determination of Rare Earth Elements, Sc, Y, Zr, Ba, Hf and Th in Geological Samples by ICP‐MS after Tm Addition and Alkaline FusionGeostandards and Geoanalytical Research, 2009
- Simultaneous determination of major to ultratrace elements in geological samples by fusion-dissolution and inductively coupled plasma mass spectrometry techniquesAnalytica Chimica Acta, 2008
- Complete Trace Elemental Characterisation of Granitoid (USGS G‐2, GSP‐2) Reference Materials by High Resolution Inductively Coupled Plasma‐Mass SpectrometryGeostandards and Geoanalytical Research, 2006
- Report of the International Association of Geoanalysts on the Certification of Penrhyn Slate, OU‐6Geostandards and Geoanalytical Research, 2005
- Multi-Element Isotope Dilution Sector Field ICP-MS: A Precise Technique for the Analysis of Geological Materials and its Application to Geological Reference MaterialsGeostandards and Geoanalytical Research, 2005
- International Association of Geoanalysts’Protocol for the Certification of Geological and Environmental Reference MaterialsGeostandards Newsletter, 2003
- Determination of Chromium, Nickel, Copper and Zinc in Milligram Samples of Geological Materials Using Isotope Dilution High Resolution Inductively Coupled Plasma‐Mass SpectrometryGeostandards Newsletter, 2002
- Evaluation of the coprecipitation of incompatible trace elements with fluoride during silicate rock dissolution by acid digestionChemical Geology, 1999