Effects of Zn Contents on Microstructure and Mechanical Properties of Semisolid Rheo-Diecasting Al-xZn-2Mg-1.5Cu Alloys
Open Access
Abstract
The microstructure and mechanical properties of semisolid rheo-diecasting Al-xZn-2Mg-1.5Cu alloys with different Zn contents were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), hardness testing (HV) and room temperature tensile testing. Results show that the as-cast microstructure mainly consists of spherical α-Al and Mg(Al, Cu, Zn)2 phases. Furthermore, a small amounts of Al7Cu2Fe phases were also detected along the grain boundary. Increasing the Zn contents from 8–12%, the volume fraction of the Mg(Al, Cu, Zn)2 phases increases from 4.9–7.4%. After solution heat treatment at 470 °C for 8 h, most of the Mg(Al, Cu, Zn)2 dissolves into the α-Al matrix, while the Al7Cu2Fe phase keeps with remains. The yield strength linearly increases from 482 ± 5 MPa of 8% Zn to 529 ± 5 MPa of 12% Zn. While, the ultimate strength of 10% Zn is 584 ± 2 MPa, which is higher than that of the other two alloys. Moreover, the average elongation dramatically decreases from 13% for the 8% Zn alloy to 2% for the 12% Zn alloy.Keywords
Funding Information
- National Natural Science Foundation of China (2016YFB0301003)
This publication has 55 references indexed in Scilit:
- T6 heat treatment of rheocasting 7075 Al alloyMaterials Science and Engineering: A, 2012
- Effects of rheoforming on microstructures and mechanical properties of 7075 wrought aluminum alloyTransactions of Nonferrous Metals Society of China, 2010
- Effects of alloy contents on strength and toughness in Al–Zn–Mg–Cu alloyJournal of Japan Institute of Light Metals, 2010
- Modelling the semisolid processing of metallic alloysProgress in Materials Science, 2005
- Effect of power ultrasound on solidification of aluminum A356 alloyMaterials Letters, 2005
- Progress in structural materials for aerospace systems11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh.Acta Materialia, 2003
- Role of Grain-Boundary Precipitates and Solute-Depleted Zone on the Intergranular Corrosion of Aluminum Alloy 7150Corrosion, 2002
- The study on characteristics of heat treatment of the direct squeeze cast 7075 wrought Al alloyMaterials Science and Engineering: A, 2001
- Retrogression and re-ageing of 7075 aluminium alloy: microstructural characterizationJournal of Materials Processing Technology, 1999
- A process model for age hardening of aluminium alloys—I. The modelActa Metallurgica et Materialia, 1990