A 120-GHz millimeter-wave MMIC chipset for future broadband wireless access applications
Authors:
- A. HirataAHA. Hirata
- T. NagatsumaTNT. Nagatsuma
- H. KyuragiHKH. Kyuragi
- 27 August 2003
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1 (0149645X) , 129-132
Abstract
A flexible CPW-MMIC (coplaner-waveguide monolithic microwave integrated circuit) chipset has been fabricated for 120 GHz future broadband wireless systems. The power amplifier has small signal gain of 8.5 dB from 115 to 135 GHz. The 1 dB compression point is 3 dBm at 120 GHz. We employed a traveling wave switch configuration for the ASK modulator. The insertion loss of the switch is less than 1.5 dB and the on-off ratio is more than 13.5 dB at 120 GHz. For the ASK modulator-demodulator chipset, the measured BER is 1e/sup -10/ for 10 Gbit/s PRBS 2/sup 11/-1 data at -13 dBm input power and 120 GHz RF frequency. The frequency doubler has an output power of -11 dBm at 120 GHz with fundamental and harmonics rejection better than 30 dBc.Keywords
This publication has 5 references indexed in Scilit:
- Multi-gigabit/s wireless links using millimeter-wave photonic techniques2004
- Investigation and application to LNA of an InP-HEMT operated at ultra low DC power levels2002
- A DC-60 GHz GaAs MMIC switch using novel distributed FET2002
- High-yield design technologies for InAlAs/InGaAs/InP-HEMT analog-digital ICsIEEE Transactions on Microwave Theory and Techniques, 1996
- Modeling of noise parameters of MESFETs and MODFETs and their frequency and temperature dependenceIEEE Transactions on Microwave Theory and Techniques, 1989