Critical Loading Identification of Compressor Stall and Vortex Criterion in Rotational Frame
Authors:
- 1 October 2025
- journal article
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 63 (10) , 4054-4067
Abstract
Critical loading, a key parameter for evaluating the limit of pressure rise in cascade, plays a fundamental role in triggering compressor stall. This work identifies specified vortex aggregation as the primary mechanism driving critical loading, which subsequently accelerates stall onset. Through 2.5-dimensional (2.5D) cascade and three-dimensional compressor simulations, the mechanisms of specified vortex aggregation are comprehensively analyzed. In the 2.5D cascade, an increased angle of attack alters the trajectory of shedding vortices, causing them to spread circumferentially and converge with local vortices in adjacent passages. This convergence results in increased upstream blockage and redistribution of mass flow pitchwise, ultimately forming a spike inception. To validate these findings in areal 3D rotating case, the stall process in a highly loaded compressor is also investigated. It is found that in 3D compressor vortex aggregation is inherently more complex due to three-dimensional and rotational effects. The simulation results reveal that the Coriolis effect significantly accelerates specified vortex aggregation, especially enhancing interactions between the leading-edge vortex and the tip leakage vortex. The interaction between the two vortexes, forming a more intricate vortex system, increases passage blockage from the midchord to the trailing edge, thereby accelerating the onset of stall eventually. This work offers new insight into the role of critical loading, Coriolis effect, and vortex dynamics in a compressor, providing an earlier local unsteady flow structure for analyzing stall precursors and assessing compressor flow instability.Keywords
Funding Information
- Beijing Nova Program (20220484074)
- Sichuan Science and Technology Program (2024JDKXJ0005)
- National Natural Science Foundation of China (52322603, U24A20141)
This publication has 27 references indexed in Scilit:
- Mathematical foundation of Liutex theoryJournal of Hydrodynamics, 2022
- Experiment investigation on the effect of inlet circumferential non-uniformity on the stall behaviours in a transonic axial compressor with axisymmetric stall precursorAerospace Science and Technology, 2022
- Effect of casing treatment to switch the type of instability inception in a high-speed axial compressorAerospace Science and Technology, 2021
- Corner separation dynamics in a high-speed compressor cascade based on detached-eddy simulationAerospace Science and Technology, 2020
- Third generation of vortex identification methods: Omega and Liutex/Rortex based systemsJournal of Hydrodynamics, 2019
- Vortex dynamic mechanism of curved blade affecting flow loss in compressor cascade during corner stall processAerospace Science and Technology, 2019
- Numerical investigations on stator hub initiated stall in a single-stage transonic axial compressorAerospace Science and Technology, 2018
- Determination of epsilon for Omega vortex identification methodJournal of Hydrodynamics, 2018
- Definitions of vortex vector and vortexJournal of Fluid Mechanics, 2018
- The hybridized Discontinuous Galerkin method for Implicit Large-Eddy Simulation of transitional turbulent flowsJournal of Computational Physics, 2017