Investigation of the mechanical properties of polyurethane foam-filled FDM-printed honeycomb core sandwich composites for aircraft
- 25 September 2023
- journal article
- research article
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 128 (1321) , 577-597
Abstract
Sandwich composites are widely used in aerospace materials thanks to their low weight and high strength properties. The purpose of this study is to observe the effects of polyurethane foam filling on honeycomb core structures produced by additive manufacturing in terms of mechanical strength and moisture absorption properties. Within the scope of the study, honeycomb structures were produced by a 3D printer using polylactic acid (PLA) filament. Then, the honeycomb core was filled with polyurethane foam, which is supplied in liquid form. After the core material was given its final form, it was combined with an epoxy and carbon fibre facesheet material using the vacuum infusion technique. After the sandwich composite production was completed, in-plane compression, three-point bending, shear, and moisture absorption tests were applied. The polyurethane foam filling greatly increased the mechanical strength, but slightly more moisture absorption occurred in this structure compared to a hollow honeycomb structure.Keywords
This publication has 23 references indexed in Scilit:
- Sandwich Structured Composites for Aeronautics: Methods of Manufacturing Affecting Some Mechanical PropertiesInternational Journal of Aerospace Engineering, 2016
- Experimental study on the fatigue behaviour of honeycomb sandwich panels with artificial defectsComposite Structures, 2015
- In plane compressive response and crushing of foam filled aluminum honeycombsJournal of Composite Materials, 2014
- Foam core impresses in aircraft studyReinforced Plastics, 2014
- Inplane crush response and energy absorption of circular cell honeycomb filled with elastomerComposite Structures, 2013
- Synergistic energy absorption in the axial crush response of filled circular cell honeycombsComposite Structures, 2012
- Development of damage in some polymeric foam-core sandwich beams under bending loadingJournal of Sandwich Structures & Materials, 2012
- Analysis of flexural properties of hollow-particle filled compositesComposites Part B: Engineering, 2010
- Polymer nanocomposite foamsComposites Science and Technology, 2005
- The mechanics of honeycombs1997