InSb working standard radiometers
Authors:
- G P EppeldauerGEG P Eppeldauer
- A L MigdallAMA L Migdall
- L M HanssenLHL M Hanssen
- 1 August 1998
- journal article
- Published by IOP Publishing in Metrologia
- Vol. 35 (4) , 485-490
Abstract
InSb radiometers have been developed and characterized for use as transfer standards at the National Institute of Standards and Technology (NIST). The InSb radiometers will hold a portion of the recently realized infrared spectral response scale of the NIST and will serve as working standards for the calibration of test detectors. These radiometers will measure radiant power or irradiance from 2 pm to 5.4 pm. They have a 17" field-of-view. The InSb detectors were selected for high shunt impedance to achieve high sensitivity. The transimpedance-gain, voltage-gain, and loop-gain of the current-to-voltage converters were optimized for optical radiation chopped at 40 Hz. At the peak response, the noise-equivalent-power is 0.6 pW in an electrical bandwidth of 0.3 Hz. The ratio of the dc ambient-background current to the ac noise-equivalent current is lo7. Spatial and angular responsivities, linearity, stability, and flashing were also characterizedKeywords
This publication has 7 references indexed in Scilit:
- Realization of an infrared spectral radiant power response scale on a cryogenic bolometerMetrologia, 1998
- Electronic characteristics of Ge and InGaAs radiometers1997
- Near-infrared radiometer standards1996
- National Institute of Standards and Technology high-accuracy cryogenic radiometerApplied Optics, 1996
- Absolute response calibration of a transfer standard cryogenic bolometer1995
- Infrared detector spectral responsivity calibration facility at the National Institute of Standards and Technology (NIST)1994
- Fourteen-decade photocurrent measurements with large-area silicon photodiodes at room temperatureApplied Optics, 1991