Unrevealing the capacitive performance of electrochemically engineered anatase-polypyrrole/ITO films: Electrochemical, microscopic and spectroscopic inspections
Authors:
Open Access
- 1 June 2025
- journal article
- research article
- Published by Egyptian Knowledge Bank in International Journal of Materials Technology and Innovation
- Vol. 5 (1) , 31-40
Abstract
The increasing demand for sustainable energy is one of the most important challenges facing the industrial sector in recent times, so we are always in constant need to search for new, simple, inexpensive and effective materials. In this prospective, homogeneous and stable electrode materials based on PPy/TiO2 on ITO glass substrate were electrochemically synthesized in aqueous medium. The electrochemically engineered films are structurally characterized and morphologically scanned using different spectroscopic and microspectroscopic techniques including X-ray diffraction (XRD), Fourier Transform Infra-Red (FTIR), and Field Emission Scanning Electron Microscope (FESEM), respectively. The light absorbance and photocurrent-potential measurements confirmed the improvement in the electronic conduction of TiO2/PPy-based deposited films. The best specific capacitance values of PPy films were achieved after 50 cycles of voltammetric deposition at 50 mV.s-1 with an oxidation current response of 4.75 mA and specific capacitance ~ 180 F.g-1. A remarkable increase in specific capacity was obtained as a result of incorporation of 10% anatase nanoparticles into the PPy matrix up to 250 F.g-1. Faster charge-discharge rates lead to the reduction of adsorbed ions on the electrode surface causing lower specific capacitance. Asymmetric supercapacitive cells of PPy@ITO and TiO2/PPy@ITO demonstrated excellent stability and capacity retention reaching up to 85% and 97.1%, respectively after 1000 multiple cycles. The impedance measurements carried out in the domain of 10 kHz to 10 mHz indicated that TiO2/PPy@ITO composite (~ ratio 0.1) has the lowest electrochemical resistance values for the electrolyte, charge transfer and ions diffusion from the electrolyte into the electrode surface.Keywords
This publication has 28 references indexed in Scilit:
- Construction of Moiré-like TiO2/polypyrrole electrodes for high performance photo-assisted supercapacitorsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2024
- Engineering of Pt@Ni,N-doped graphene electrocatalyst based on recycled water bottles waste as an efficient cathode material for PEM fuel cellsDiamond and Related Materials, 2024
- One-pot synthesis of TiO2-decorated SnSe/ZnS as a novel anode material with promoted storage capacity and cyclability in lithium-ion batteriesJournal of Materials Science: Materials in Electronics, 2024
- Hydrogen production by water splitting coupled with the oxidation of coke oven gas in a catalytic oxygen transport membrane reactorChemical Engineering Journal, 2023
- Fabrication of Ni3S2-functionalized V2O3 nanospheres as promising anode materials for rechargeable batteries and supercapacitorsApplied Physics A, 2023
- An overview of recent progress in nanostructured carbon-based supercapacitor electrodes: From zero to bi-dimensional materialsCarbon, 2022
- Photocatalytic reduction of hexavalent chromium with commercial Fe/Ti oxide catalyst under UV and visible light irradiationInternational Journal of Environmental Science and Technology, 2017
- Conducting polymers-based electrochemical supercapacitors—Progress and prospectsElectrochimica Acta, 2013
- Manganese oxide embedded polypyrrole nanocomposites for electrochemical supercapacitorElectrochimica Acta, 2008
- Highly dispersed hydrous ruthenium oxide in poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonic acid) for supercapacitor electrodeElectrochimica Acta, 2006