Performance Of Concrete-To-Concrete Bond Strength in Wetland Area
Open Access
- 17 January 2024
- conference paper
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 476, 01062
Abstract
One of the techniques of building rehabilitation methods is repairing. Repair is a rehabilitation process to restore the initial capacity of damaged structures on structural components. A fairly popular repair technique is concrete-to-concrete. The strength of this bonding depends on several factors. The mixture used to repair the material affects the bond strength, as does the surface treatment and curing conditions. The study analysedanalysed the influence of strong bonds on surface treatment and curing conditions. Surface preparations were performed with four methods: as cast, drill holes, grooving, and bonding agent. The curing cycle applied two conditions: normal and wet-dry, and the test objects were compressive strength tests, slant shear tests, tensile tests, and flexural tests. The study results showed that the influence of wet-dry environmental conditions was lower than normal environmental conditions, and the highest bond strength values were found in grooving treatments, drill holes, as cast and bonding agents.Keywords
This publication has 11 references indexed in Scilit:
- Interfacial bond behavior between ultra high performance concrete and normal concrete substratesConstruction and Building Materials, 2022
- Comparative study on the new-old mortar interface deterioration after wet-dry cycles and heat-cool cyclesConstruction and Building Materials, 2020
- An experimental approach for shear strengthening of RC beams using a proposed technique by embedded through-section FRP sheetsComposite Structures, 2020
- Experimental evaluation of concrete-to-UHPC bond strength with correlation to surface roughness for repair applicationConstruction and Building Materials, 2020
- Repair of Heavily Damaged RC Beams Failing in Shear Using U-Shaped Mortar JacketsBuildings, 2019
- Near-to-surface properties affecting bond strength in concrete repairCement and Concrete Composites, 2014
- Effectiveness of repair on damaged concrete columns by using fiber-reinforced polymer composite and increasing concrete sectionJournal of Reinforced Plastics and Composites, 2012
- Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear2008
- Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)2008
- Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens2008