Reduction in percolation threshold of injection molded high‐density polyethylene/exfoliated graphene nanoplatelets composites by solid state ball milling and solid state shear pulverization
Authors:
- 5 October 2011
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 124 (1) , 525-535
Abstract
Previous work showed that high density polyethylene (HDPE)/exfoliated graphene nanoplatelets (GNP) nanocomposites fabricated with melt extrusion followed by injection molding had a relatively high percolation threshold of between 10 and 15 vol % GNP loading. To lower the percolation threshold of injection molded HDPE/GNP nanocomposites, two special processing methods were investigated: solid state ball milling (SSBM) and solid state shear pulverization (SSSP). Results have confirmed that the percolation threshold of HDPE/GNP nanocomposites could be reduced to between 3 and 5 vol % GNP loading by these two approaches. The mechanism by which SSBM and SSSP are capable of producing lower percolation is to coat the polymer surface with GNP platelets which facilitates the formation of conductive networks during injection molding. However, it was found that HDPE/GNP nanocomposites obtained from these two techniques exhibited lower mechanical properties at high GNP loadings. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012Keywords
This publication has 25 references indexed in Scilit:
- Multifunctional high density polyethylene nanocomposites produced by incorporation of exfoliated graphite nanoplatelets 1: Morphology and mechanical propertiesPolymer Composites, 2010
- Lowering the percolation threshold of single-walled carbon nanotubes using polystyrene/poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) blendsSoft Matter, 2009
- Improved through‐plane electrical conductivity in a carbon‐filled thermoplastic via foamingPolymer Engineering & Science, 2008
- Properties of a carbon filled cyclic olefin copolymerJournal of Polymer Science Part B: Polymer Physics, 2007
- Electrochemical Characterization of Electrochemically Prepared Ruthenium Oxide/Carbon Nanotube Electrode for Supercapacitor ApplicationElectrochemical and Solid-State Letters, 2005
- Review and analysis of PEM fuel cell design and manufacturingJournal of Power Sources, 2003
- Stabilization of Dispersed Phase to Static Coarsening: Polymer Blend Compatibilization via Solid-State Shear PulverizationMacromolecules, 2002
- Semiconducting and Metallic Polymers: The Fourth Generation of Polymeric MaterialsThe Journal of Physical Chemistry B, 2001
- Photovoltaic cells with a conjugated polyelectrolyteSynthetic Metals, 2000
- Novel Strategy for Polymer Blend Compatibilization: Solid-State Shear PulverizationMacromolecules, 1999