Bridge Load Testing for Identifying Live Load Distribution, Load Rating, Serviceability and Dynamic Response
Open Access
- 6 May 2020
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Built Environment
- Vol. 6
Abstract
In this article, dynamic and static load tests of a concrete highway bridge, which is a deteriorated and repaired, are presented depending on displacement and strain data for engineering decision making about the operation of a critical bridge. Static load test was carried out to determine the live load distribution factor (DF) and load-rating factor (RF) as well as serviceability by means of deflection limits. Modal characteristics in terms of structural frequencies and mode shapes and impact factor (IM) were identified from the dynamic load test for different truck-load and speed cases, and finite element (FE) model. The DF and rating factor (RF) were also compared with those calculated according to AASHTO standard and FE model. The results showed that the DF calculated by American Association of State Highway and Transportation Officials (AASHTO) standard gave more conservative results when compared with the experimental and FEM approaches. Similarly, the load-rating factor (RF) calculated by AASHTO standard yielded to more conservative results comparing with the experimental FEM approaches using practical DFs. Maximum deflections in static cases and dynamic cases were found to be within the limit calculated by (L/800) given in the AASHTO code. Impact factors among all the cases were obtained much smaller than the one recommended by AASHTO standard (33%). The modal properties were obtained to track changes in dynamic behavior due to stiffness and boundary effects as well as for finite element model calibration. The calibrated FE model of the bridge also indicated that the load carrying capacity of the bridge is adequate after repair. Finally, the results from the current study reveal that use of experimental data can be utilized to obtain load rating with minimum interruption to bridge operations through computer vision technology and methods.Keywords
This publication has 14 references indexed in Scilit:
- A non-target structural displacement measurement method using advanced feature matching strategyAdvances in Structural Engineering, 2019
- Condition Assessment of Reinforced Concrete Bridges: Current Practice and Research ChallengesInfrastructures, 2018
- Integrated Superstructure-Substructure Load Rating for Bridges with Foundation MovementsJournal of Bridge Engineering, 2018
- Comparison of Visual Inspection and Structural-Health Monitoring As Bridge Condition Assessment MethodsJournal of Performance of Constructed Facilities, 2016
- Load Rating of a Fully Instrumented Bridge: Comparison of LRFR ApproachesJournal of Performance of Constructed Facilities, 2016
- Structural Identification of Constructed Systems2013
- Practical Approach for Estimating Distribution Factor for Load Rating: Demonstration on Reinforced Concrete T-Beam BridgesJournal of Bridge Engineering, 2012
- Evaluation of Load Rating and System Reliability of Movable BridgeTransportation Research Record: Journal of the Transportation Research Board, 2011
- Static and Dynamic Testing of a Concrete T-Beam Bridge before and after Carbon Fiber–Reinforced Polymer RetrofitTransportation Research Record: Journal of the Transportation Research Board, 2006
- Strategies for load rating of infrastructure populations: a case study on T-beam bridgesStructure and Infrastructure Engineering, 2005