An Interfacial Curvature Distribution Model and Phase Inversion
Author:
- 6 October 2017
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 66 (8) , e15992
Abstract
The state of the two‐phase system is described by the interfacial curvature distribution. A phenomenological closure model is proposed for the exact (unclosed) equations. Parameters of the model are related to the existing correlations for drop size in stirred flows. If water is dispersed in oil, the curvature has a uni‐modal distribution with a positive mode. When a control parameter, e.g., water volume fraction is increasing, the distribution becomes bi‐modal with both negative and positive values. After a while, the phase inversion occurs, and the distribution becomes uni‐modal with a negative mode. Going in the other direction the phase inversion happens at lower volume fraction of water, i.e., there is an ambivalent region, where both phases might be in the dispersed state. The model implies, that even if the conditions for phase inversion are met, there might be a significant delay before the new morphology is established.Keywords
This publication has 23 references indexed in Scilit:
- Preparation of size-controlled polymer particles by polymerization of O/W emulsion monomer droplets obtained through phase inversion temperature emulsification using amphiphilic comb-like block polymersColloids and Surfaces A: Physicochemical and Engineering Aspects, 2015
- Phase inversion emulsification: Current understanding and applicationsAdvances in Colloid and Interface Science, 2015
- Phenomenological description of phase inversionPhysical Review E, 2009
- On the phase inversion process in an oil–water pipe flowInternational Journal of Multiphase Flow, 2008
- The production of small monomer drops in liquid–liquid dispersions by approaching a catastrophic phase inversionColloids and Surfaces A: Physicochemical and Engineering Aspects, 2005
- Break-up, coalescence and catastrophic phase inversion in turbulent contactorsAdvances in Colloid and Interface Science, 2004
- Simulation Studies of Phase Inversion in Agitated Vessels Using a Monte Carlo TechniqueJournal of Colloid and Interface Science, 2002
- A simple predictive tool for modelling phase inversion in liquid–liquid dispersionsChemical Engineering Science, 2002
- PHASE INVERSION AND ASSOCIATED PHENOMENAMultiphase Science and Technology, 2000
- Interpretation of emulsion phase inversion as a cusp catastropheJournal of Colloid and Interface Science, 1981