Comparative study of resists and lithographic tools using the Lumped Parameter Model
Authors:
- 1 November 2016
- journal article
- research article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 34 (6) , 06K702
Abstract
A comparison of the performance of high resolution lithographic tools is presented here. The authors use extreme ultraviolet interference lithography, electron beam lithography, and He ion beam lithography tools on two different resists that are processed under the same conditions. The dose-to-clear and the lithographic contrast are determined experimentally and are used to compare the relative efficiency of each tool. The results are compared to previous studies and interpreted in the light of each tool-specific secondary electron yield. In addition, the patterning performance is studied by exposing dense lines/spaces patterns, and the relation between critical dimension and exposure dose is discussed. Finally, the lumped parameter model is employed in order to quantitatively estimate the critical dimension of lines/spaces, using each tool specific aerial image. Our implementation is then validated by fitting the model to the experimental data from interference lithography exposures and extracting the resist contrast.Keywords
All Related Versions
Funding Information
- Horizon 2020 (654360)
This publication has 41 references indexed in Scilit:
- Beam induced deposition of platinum using a helium ion microscopeJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2009
- Sub-10-nm nanolithography with a scanning helium beamJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2009
- EUV Lithography2008
- An Introduction to the Helium Ion MicroscopeAIP Conference Proceedings, 2007
- Resist process development for sub-100-nm ion projection lithographyMicroelectronic Engineering, 2001
- Electron beam and scanning probe lithography: A comparisonJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1998
- Photolithography at 0.10 and 0.13 μm using ArF excimer laser lithography in combination with resolution enhancement techniquesJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1997
- Imprint of sub-25 nm vias and trenches in polymersApplied Physics Letters, 1995
- Electron beam lithographyJournal of Vacuum Science and Technology, 1982
- Ion beam lithographyNuclear Instruments and Methods in Physics Research, 1981