A study on friction-tuned mass damper: harmonic solution and statistical linearization
Authors:
- 23 September 2010
- journal article
- other
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 17 (5) , 721-731
Abstract
Tuned mass dampers (TMDs) have been a popular vibration control device used primarily for suppressing wind-induced oscillations in tall structures and have recently also been used for controlling vibrations due to seismic excitations. A nonlinear damper consisting of a TMD with a nonlinear dry (pure) friction damping at the interface between the primary structure and the TMD is analyzed in this paper. This nonlinear damper has potential for control of vibration but has not received much attention by researchers. In particular, the nonlinear behavior of the system has not been explored in detail so far. A periodic solution for the response of the structure-friction TMD (FTMD) system modeled as a two-degree-of-freedom system is obtained under harmonic excitation using harmonic balance based on a method of averaging. To consider more realistic random excitations, a statistical linearization method is used to replace the nonlinear friction by an equivalent viscous damping. Numerical simulations have demonstrated that the linearized solutions for both the harmonic and the random cases are accurate enough. The periodic and statistical linearized solutions are used to analyze dynamic characteristics of structure-FTMD system. As expected in a nonlinear system, the frequency response function (FRF) of the displacement response of the structure for the structure-FTMD system is dependent on the level of excitation. For a given level of excitation, an optimum friction coefficient has been found to exist which corresponds to the least root-mean-square value of the displacement response of the primary mass.Keywords
This publication has 19 references indexed in Scilit:
- Tuned mass damper with nonlinear viscous dampingJournal of Sound and Vibration, 2007
- A closed-form optimal tuning criterion for TMD in damped structuresStructural Control and Health Monitoring, 2006
- Feasibility study of a tunable friction damperJournal of Sound and Vibration, 2005
- DYNAMIC ANALYSIS OF A TALL BUILDING WITH A TUNED-MASS-DAMPER DEVICE SUBJECTED TO EARTHQUAKE EXCITATIONSJournal of Sound and Vibration, 2001
- MODELLING TWO-DIMENSIONAL FRICTION CONTACT AND ITS APPLICATION USING HARMONIC BALANCE METHODJournal of Sound and Vibration, 1996
- Design formulas for tuned mass dampers based on A perturbation techniqueEarthquake Engineering & Structural Dynamics, 1993
- Optimum absorber parameters for various combinations of response and excitation parametersEarthquake Engineering & Structural Dynamics, 1982
- Optimum Vibration Absorbers for Linear Damped SystemsJournal of Mechanical Design, 1981
- On the Dynamic Vibration Damped Absorber of the Vibration SystemBulletin of JSME, 1978
- Steady-State Behavior of the Dynamic AbsorberThe Journal of the Acoustical Society of America, 1959