The Full-IMCs Interconnects through Transient Liquid Phase Bonding of Ga/Cu System for Advanced Electronic Packaging
Authors:
- 1 May 2023
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1689-1693
Abstract
To meet the needs for further miniaturization and multi-functionalization of microelectronics, three-dimensional (3D) integrated circuits and advanced interconnects have become the most promising packaging technology in the semiconductor industry. 3D integrated circuit (ICs) packaging is based on 2D processes and stacks of ICs vertically to achieve the dual role of space compression and improving data transmission efficiency. As a relatively new bonding method, the low temperature transient liquid phase bonding (TLPB) technique shows a great potential for multiple bonding on the same substrate. This study uses gallium (Ga) metal as the interconnect material to achieve the Cu-to-Cu TLPB process. The aim is to investigate the Ga/Cu IMCs grains growth kinetics, the microstructure of IMCs in these joints and their mechanical properties bonded at 200°C. The results show that the Ga solder presents excellent bondability on Cu substrate, forming cube-like CuGa2 grains which can grow stably at 200°C, and this anisotropy of IMC grains growth is beneficial to the microstructure and strength of the joint. These results provide strong evidence for the feasibility of such a novel manufacturing route for 3D IC packaging and heterogeneous integration.Keywords
This publication has 18 references indexed in Scilit:
- Integrated circuit packaging review with an emphasis on 3D packagingIntegration, 2018
- Overview and Outlook of Three-Dimensional Integrated Circuit Packaging, Three-Dimensional Si Integration, and Three-Dimensional Integrated Circuit IntegrationJournal of Electronic Packaging, 2014
- Pressureless sintering of nanosilver paste at low temperature to join large area (≥100mm2) power chips for electronic packagingMaterials Letters, 2014
- A reliable Cu–Sn stack bonding technology for 3D-TSV packagingSemiconductor Science and Technology, 2014
- Rapid pressureless low-temperature sintering of Ag nanoparticles for high-power density electronic packagingScripta Materialia, 2013
- Interfacial Reactions in Cu/Ga and Cu/Ga/Cu CouplesJournal of Electronic Materials, 2013
- Transient Thermal Impedance Measurements on Low-Temperature-Sintered Nanoscale Silver JointsJournal of Electronic Materials, 2012
- Deformation, structural changes and damage evolution in nanotwinned copper under repeated frictional contact slidingActa Materialia, 2011
- Observation of Atomic Diffusion at Twin-Modified Grain Boundaries in CopperScience, 2008
- Ultrahigh Strength and High Electrical Conductivity in CopperScience, 2004