Thermosetting polymer templated nanoporous sinter-active layer for low temperature solid oxidefuelcells
- 23 December 2009
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 20 (6) , 1122-1126
Abstract
A facile synthesis method was developed to form a nanoporous metal oxide layer using poly(furfuryl alcohol) (PFA) as a thermosetting polymer template. A nanoporous Ce0.8Sm0.2O1.9 (SDC) layer with high sinterability was prepared on an anode-supported electrolyte film at 900 °C, and used as a sinter-active layer in cell fabrication to improve the interface between the inert electrolyte surface and the cathode layer of a solid oxide fuel cell (SOFC). The resulting saw-like interface improved the maximum powder density of the cell by 51% at 600 °C and 162% at 500 °C compared with that of the unmodified cell. The cell with the saw-like electrolyte–cathode interface exhibited lower electrode polarization resistance than those reported in the literature, and such improvement was much more significant at reduced operating temperatures (400–500 °C). Our study shows that the operating temperature of solid oxide fuel cells can be substantially lowered by simply improving the electrode–electrolyte interfaces.Keywords
This publication has 25 references indexed in Scilit:
- Design, Synthesis, Structural and Textural Characterization, and Electrical Properties of Mesoporous Thin Films Made of Rare Earth Oxide BinariesChemistry of Materials, 2009
- A ceria layer as diffusion barrier between LAMOX and lanthanum strontium cobalt ferrite along with the impedance analysisSolid State Ionics, 2009
- Properties and performance of Ba0.5Sr0.5Co0.8Fe0.2O3−δ+Sm0.2Ce0.8O1.9 composite cathodeJournal of Power Sources, 2008
- Property change of a LaNi0.6Fe0.4O3 cathode in the initial current loading process and the influence of a ceria interlayerSolid State Ionics, 2008
- Preparation of Pr0.35Nd0.35Sr0.3MnO3−δ/YSZ composite cathode powders for tubular solid oxide fuel cells by microwave-induced monomer gelation and gel combustion synthesis processJournal of Power Sources, 2008
- Improvement of cathode–electrolyte interfaces of tubular solid oxide fuel cells by fabricating dense YSZ electrolyte membranes with indented surfacesJournal of Power Sources, 2008
- Preparation of Crystalline Mesoporous Titania Using Furfuryl Alcohol as Polymerizable SolventIndustrial & Engineering Chemistry Research, 2007
- Sm0.5Sr0.5CoO3+Sm0.2Ce0.8O1.9 composite cathode for cermet supported thin Sm0.2Ce0.8O1.9 electrolyte SOFC operating below 600°CJournal of Power Sources, 2006
- Composition and porosity graded La2−xNiO4+δ (x≥0) interlayers for SOFC: Control of the microstructure via a sol–gel processJournal of Power Sources, 2006
- Effect of CeO2 interlayer on ZrO2 electrolyte/La(Sr)CoO3 cathode for low-temperature SOFCsSolid State Ionics, 2004