Activating in-plane dead zones of anode catalyst layers in proton exchange membrane water electrolyzers
Open Access
- 1 July 2026
- journal article
- research article
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Abstract
The utilization of iridium-based anode catalysts in proton exchange membrane water electrolyzers is largely limited by the presence of electrochemically inactive “dead zones” within the catalyst layer. Here, by combining in-situ visualization of gas bubble evolution with quantitative conductivity measurements and electrochemical analysis, we establish that the limited in-plane electronic conductivity, dictated by the ionomer disrupting the conductive network of IrO 2 nanocatalysts, is the dominant factor. A sequential spray-coating strategy is further developed, which decouples the deposition of a pristine conductive catalyst layer from the ionomer and thereby preserves continuous electron transport pathways. This approach effectively activates the in-plane dead zones, resulting in membrane electrode assemblies that exhibit over 30% higher activity (4.2 A cm −2 @2.0 V@80 °C; membrane: Nafion 115) than those prepared by the conventional one-step method based on IrO 2 /ionomer mixed inks. Crucially, this approach achieves both low iridium loading (0.25 mg cm –2 ) with standard catalysts and demonstrates extended stability over 8300 hours under practical current densities.Keywords
Funding Information
- National Natural Science Foundation of China (22579064)
- National Natural Science Foundation of China (22279040)
This publication has 41 references indexed in Scilit:
- Proton‐Conducting, Vacancy‐Rich H
x
IrO
y
Nanosheets for the Fabrication of Low‐Ionomer‐Dependent Anode Catalyst Layer in PEM Water ElectrolyzerAngewandte Chemie International Edition, 2025
- Proton Exchange Membrane Water Splitting: Advances in Electrode Structure and Mass‐Charge Transport OptimizationAdvanced Materials, 2025
- Bridging gaps between lab- and fab-oriented anode design for proton exchange membrane water electrolyzersChem, 2024
- Optimizing Ionomer Distribution in Anode Catalyst Layer for Stable Proton Exchange Membrane Water ElectrolysisAdvanced Materials, 2024
- Ionomer-free nanoporous iridium nanosheet electrodes with boosted performance and catalyst utilization for high-efficiency water electrolyzersApplied Catalysis B: Environment and Energy, 2023
- Toward Understanding Catalyst Layer Deposition Processes and Distribution in Anodic Porous Transport Electrodes in Proton Exchange Membrane Water ElectrolyzersAdvanced Energy Materials, 2023
- Tuning Catalyst Activation and Utilization Via Controlled Electrode Patterning for Low‐Loading and High‐Efficiency Water ElectrolyzersSmall, 2022
- Essentials of High Performance Water Electrolyzers – From Catalyst Layer Materials to Electrode EngineeringAdvanced Energy Materials, 2021
- Activity and stability of Ir-based gas diffusion electrode for proton exchange membrane water electrolyzerChemical Engineering Journal, 2021
- Building Electron/Proton Nanohighways for Full Utilization of Water Splitting CatalystsAdvanced Energy Materials, 2020