Electro‐responsive shape‐memory composites obtained via dual‐curing processing
Open Access
- 13 February 2022
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 33 (5) , 1715-1726
Abstract
In this work, electro‐responsive shape‐memory actuators were developed by incorporating a conductive heater in a dual‐curing thiol‐acrylate‐epoxy shape‐memory polymer (SMP). A conductive heater, consisting of an electrically conductive silver‐ink track printed on Kapton® substrate, was assembled to the SMP, taking advantage of the dual‐curing processing. The shape‐memory effect (SME) was activated by the heat dissipated by the Joule effect in the conductive track. Boron nitride agglomerates were dispersed in the thiol‐acrylate‐epoxy layers to increase thermal conductivity and achieve faster shape‐recovery. A thermoelectric control unit was developed to control the shape recovery of the electro‐responsive actuators and provide different activation strategies. The electrically activated SME was investigated and compared to a traditional SME based on an external heating source given by the dynamic mechanical analyzer (DMA) apparatus. Electro‐responsive actuators were found extremely faster than the conventional SMPs based on external heating. The fastest recovery was obtained by the 15% boron nitride actuator, which recovered the 100% of the original shape in only 8 s. The thermoelectric controlling device provided an optimal control of the shape recovery speed based on the pulse width modulation of the heating current under the application of a low voltage (5 V).Keywords
Funding Information
- Generalitat de Catalunya
This publication has 37 references indexed in Scilit:
- Functionally graded and self-assembled carbon nanofiber and boron nitride in nanopaper for electrical actuation of shape memory nanocompositesComposites Part B: Engineering, 2014
- Shape‐Memory Effect in PolymersMacromolecular Chemistry and Physics, 2013
- Thermally induced shape‐memory effects in polymers: Quantification and related modeling approachesJournal of Polymer Science Part B: Polymer Physics, 2013
- Photopolymerized thiol-ene systems as shape memory polymersPolymer, 2010
- Conductive shape memory nanocomposites for high speed electrical actuationSoft Matter, 2010
- Strong, Tailored, Biocompatible Shape‐Memory Polymer NetworksAdvanced Functional Materials, 2008
- Shape recovery and irrecoverable strain control in polyurethane shape-memory polymerScience and Technology of Advanced Materials, 2008
- Unconstrained recovery characterization of shape-memory polymer networks for cardiovascular applicationsBiomaterials, 2007
- Effect of Joule heating on efficiency and performance for microchip‐based and capillary‐based electrophoretic separation systems: A closer lookElectrophoresis, 2004
- Photothermal properties of shape memory polymer micro‐actuators for treating stroke*Lasers in Surgery and Medicine, 2002