Dynamic control and dead-time compensation method of an isolated dual-active-bridge DC-DC converter
Authors:
- 1 September 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
Abstract
This paper presents dynamic control and a dead-time compensation method of an isolated dual-active-bridge (DAB) dc-dc converter. Conventional phase-shift control methods for the DAB converter may cause dc offsets in both inductor current and transformer magnetic flux density in transient states. The dynamic control method in this paper independently controls the diagonal switches in each H-bridge converter to modify the duty ratios in transient states. This method enables both inductor current and transformer magnetic flux density to be settled within a half switching period without any dc offsets. Moreover, the phase-shift error caused by the dead time is analyzed in terms of the switching angle. This analysis reveals that the dead time causes the switching-angle error in only one of the two H-bridge converters and may cause dc offsets. A new dead-time compensation method based on this analysis is proposed to eliminate the dc offsets and to achieve a good dynamic response. A 5-kW experimental system verifies the validity of the proposed control method.Keywords
This publication has 11 references indexed in Scilit:
- An Optimized Phase-Shift Modulation For Fast Transient Response in a Dual-Active-Bridge ConverterIEEE Transactions on Power Electronics, 2013
- Flux Balancing of Isolation Transformers and Application of “The Magnetic Ear” for Closed-Loop Volt–Second CompensationIEEE Transactions on Power Electronics, 2013
- Dead-Time Effect of the High-Frequency Isolated Bidirectional Full-Bridge DC–DC Converter: Comprehensive Theoretical Analysis and Experimental VerificationIEEE Transactions on Power Electronics, 2013
- Closed-Loop Control of DC–DC Dual-Active-Bridge Converters Driving Single-Phase InvertersIEEE Transactions on Power Electronics, 2013
- Dynamic and Balanced Control of Three-Phase High-Power Dual-Active Bridge DC–DC Converters in DC-Grid ApplicationsIEEE Transactions on Power Electronics, 2013
- Enhanced Load Step Response for a Bidirectional DC–DC ConverterIEEE Transactions on Power Electronics, 2012
- Design and Performance of a Bidirectional Isolated DC–DC Converter for a Battery Energy Storage SystemIEEE Transactions on Power Electronics, 2012
- Accurate Small-Signal Model for the Digital Control of an Automotive Bidirectional Dual Active BridgeIEEE Transactions on Power Electronics, 2009
- Power Flow Characterization of a Bidirectional Galvanically Isolated High-Power DC/DC Converter Over a Wide Operating RangeIEEE Transactions on Power Electronics, 2009
- Performance characterization of a high-power dual active bridge DC-to-DC converterIEEE Transactions on Industry Applications, 1992