An Experimental Study on Mechanical Behavior of Parallel Joint Specimens under Compression Shear
Authors:
Open Access
- 1 January 2018
- journal article
- research article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2018 (1)
Abstract
In order to investigate the influence of the joint on the failure mode, peak shear strength, and shear stress‐strain curve of rock mass, the compression shear test loading on the parallel jointed specimens was carried out, and the acoustic emission system was used to monitor the loading process. The joint spacing and joint overlap were varied to alter the relative positions of parallel joints in geometry. Under compression‐shear loading, the failure mode of the joint specimen can be classified into four types: coplanar shear failure, shear failure along the joint plane, shear failure along the shear stress plane, and similar integrity shear failure. The joint dip angle has a decisive effect on the failure mode of the specimen. The joint overlap affects the crack development of the specimen but does not change the failure mode of the specimen. The joint spacing can change the failure mode of the specimen. The shear strength of the specimen firstly increases and then decreases with the increase of the dip angle and reaches the maximum at 45°. The shear strength decreases with the increase of the joint overlap and increases with the increase of the joint spacing. The shear stress‐displacement curves of different joint inclination samples have differences which mainly reflect in the postrupture stage. From monitoring results of the AE system, the variation regular of the AE count corresponds to the failure mode, and the peak value of the AE count decreases with the increase of joint overlap and increases with the increase of joint spacing.Keywords
Funding Information
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation (2016M600636, SKLGDUEK1724)
This publication has 18 references indexed in Scilit:
- Internal stress distribution and cracking around flaws and openings of rock block under uniaxial compression: A particle mechanics approachComputers and Geotechnics, 2018
- Crack growth analysis for rock-like materials with ordered multiple pre-cracks under biaxial compressionJournal of Central South University, 2017
- Effect of parallel joint interaction on mechanical behavior of jointed rock mass modelsInternational Journal of Rock Mechanics and Mining Sciences, 2017
- An Experimental and Numerical Study on Mechanical Behavior of Ubiquitous-Joint Brittle Rock-Like Specimens Under Uniaxial CompressionRock Mechanics and Rock Engineering, 2016
- Crack propagation and coalescence of brittle rock-like specimens with pre-existing cracks in compressionEngineering Geology, 2015
- Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compressionComputers and Geotechnics, 2013
- Crack Initiation, Propagation and Coalescence in Rock-Like Material Containing Two Flaws: a Numerical Study Based on Bonded-Particle Model ApproachRock Mechanics and Rock Engineering, 2012
- Analysis of crack coalescence in rock-like materials containing three flaws—Part II: numerical approachInternational Journal of Rock Mechanics and Mining Sciences, 2001
- Fracture coalescence in rock-type materials under uniaxial and biaxial compressionInternational Journal of Rock Mechanics and Mining Sciences, 1998
- Crack coalescence in a rock-like material containing two cracksInternational Journal of Rock Mechanics and Mining Sciences, 1998