Structural Control of Piezoelectric Laminated Beams under Thermal Load
Authors:
- 30 September 2014
- journal article
- research article
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 38 (1) , 69-95
Abstract
The dynamic analysis and the active vibration control of piezoelectric laminated beams under thermal load are presented. The beam is modeled using two noded finite elements with four mechanical and a variable number of electric potential degrees of freedom at each node. In the thickness direction, the thermal and the electric fields are approximated as piecewise linear across an arbitrary number of sublayers in a layer. Cubic Hermite interpolation is used for the deflection and electric potentials at the sublayers and linear interpolation is used for the axial displacement and the shear rotation. The thermal field is computed using a consistent six-noded thermal finite element with a quadratic interpolation along longitudinal direction and a linear interpolation along thickness direction. The temperature distribution and undamped natural frequencies are obtained for composite and sandwich beam under cantilever and clamped-clamped boundary conditions and compared with 2D-FE Abaqus results. The finite element equations derived are converted into modal model to represent them in the state space form. This model is then reduced using Hankel norm for designing the LQG controller. Optimal control technique is used to control the vibration of the beam. The designed LQG controller controls the tip deflection of composite and sandwich cantilever beams and midpoint deflection of clamped-clamped beams.Keywords
This publication has 36 references indexed in Scilit:
- Thermally induced vibration control of cylindrical shell using piezoelectric sensor and actuatorThe International Journal of Advanced Manufacturing Technology, 2007
- Three-dimensional analysis of the coupled thermo-piezoelectro-mechanical behaviour of multilayered plates using the differential quadrature techniqueInternational Journal of Solids and Structures, 2005
- GENERALIZED PLANE STRAIN THERMOPIEZOELECTRIC ANALYSIS OF MULTILAYERED PLATESJournal of Thermal Stresses, 2003
- Cylindrical Bending of Laminated Plates with Distributed and Segmented Piezoelectric Actuators/SensorsAIAA Journal, 2000
- CONTROL OF ADAPTIVE SHELLS WITH THERMAL AND MECHANICAL EXCITATIONSJournal of Sound and Vibration, 2000
- Piezothermoelastic Modeling and Active Vibration Control of Laminated Composite BeamsJournal of Intelligent Material Systems and Structures, 1999
- Three-dimensional analytical solutions for coupled thermoelectroelastic response of multilayered cylindrical shellsAIAA Journal, 1996
- Piezothermoelasticity and Precision Control of Piezoelectric Systems: Theory and Finite Element AnalysisJournal of Vibration and Acoustics, 1994
- Piezothermoelastic composite plate analysis using first-order shear deformation theoryComputers & Structures, 1994
- PIEZOTHERMOELASTIC BEHAVIOR OF A LAMINATED PLATEJournal of Thermal Stresses, 1992