An experimental database on the effects of single- and split injection strategies on spray formation and spark discharge in an optical direct-injection spark-ignition engine fuelled with gasoline, iso-octane and alcohols
- 16 October 2014
- journal article
- research article
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 16 (7) , 851-896
Abstract
This article presents results from a comprehensive optical study of a direct-injection spark-ignition research engine running on gasoline, iso-octane, ethanol, n-butanol and E10 fuels injected from a multi-hole central vertically positioned injector. The analysis was based on images of spray development, spark discharge and combustion to understand the effects of early and late injection strategies on in-cylinder phenomena. Specifically, `single'-injection strategies from early to late intake stroke as well as multiple `split' injection events with triple pulses in the early intake stroke or double pulses in the intake stroke and late compression stroke were investigated. The engine was run at 1500 r/min at part- and full-load conditions (0.5 and 1.0 bar inlet plenum pressure, respectively). Engine coolant temperatures of 20°C–90°C were employed to understand how fuel volatility was related to the phenomena observed. The sprays were imaged over a series of cycles primarily by laser sheet illumination on one vertical and two horizontal planes to identify three-dimensional aspects of the spray's development and its interactions with the incoming flow, valves, piston and liner. There was a clear fuel-impingement trade-off between early and late injection timings. The spark discharge was also imaged with all injection strategies and clear differences were observed. Selective combustion imaging provided insights into the flame's growth and motion with early and double early–late split injection strategies. The double earlylate injection strategy demonstrated the potential for control of the mixture formation and flow field over the early flame development stage of combustion.Keywords
This publication has 42 references indexed in Scilit:
- FLOW-FIELD INVESTIGATION OF MULTIHOLE SUPERHEATED SPRAYS USING HIGH-SPEED PIV. PART II. AXIAL DIRECTIONAtomization and Sprays, 2013
- FLOW-FIELD INVESTIGATION OF MULTI-HOLE SUPERHEATED SPRAYS USING HIGH-SPEED PIV. PART I.CROSS-SECTIONAL DIRECTIONAtomization and Sprays, 2012
- LES study of cycle-to-cycle variations in a spark ignition engineProceedings of the Combustion Institute, 2011
- Effect of fuel temperature on in-nozzle cavitation and spray formation of liquid hydrocarbons and alcohols from a real-size optical injector for direct-injection spark-ignition enginesInternational Journal of Heat and Mass Transfer, 2010
- High-Speed Flow and Fuel Imaging Study of Available Spark Energy in a Spray-Guided Direct-Injection Engine and Implications on MisfiresInternational Journal of Engine Research, 2010
- Cavitation, primary break-up and flash boiling of gasoline, iso-octane and n-pentane with a real-size optical direct-injection nozzleFuel, 2010
- Mechanisms of spray formation and combustion from a multi-hole injector with E85 and gasolineCombustion and Flame, 2010
- Towards the understanding of cyclic variability in a spark ignited engine using multi-cycle LESCombustion and Flame, 2009
- EFFECT OF OPERATING CONDITIONS AND FUEL VOLATILITY ON DEVELOPMENT AND VARIABILITY OF SPRAYS FROM GASOLINE DIRECT-INJECTION MULTIHOLE INJECTORSAtomization and Sprays, 2009
- Automotive spark-ignited direct-injection gasoline enginesProgress in Energy and Combustion Science, 1999