The Effect of Cobalt Incorporation on the Microstructure and Properties of Cu(Co) Alloys for Use in Hybrid Bonding
Open Access
Abstract
In this study, the properties of Cu(Co) alloy films were investigated to assess their utility as an alternative material for interconnections in hybrid bonding applications. Thin films of Cu(Co) were deposited using electrochemical deposition in a standard sulfate-based electrolyte. X-ray photoelectron spectroscopy (XPS) of the films revealed that an increasing current density during deposition resulted in an increase in cobalt concentration. Bright-field scanning transmission electron microscopy (STEM) coupled with energy-dispersive x-ray spectroscopy (EDS) was used to visualize the fine-grained microstructure and confirmed grain boundary segregation of cobalt in the films. X-ray diffraction with a heated stage determined that the coefficient of thermal expansion (CTE) increased linearly with increasing cobalt content, from 17.5 ppm/K for pure copper to a maximum of 27.5 ppm/K for a film containing 24 at.% Co. Nanoindentation experiments found that the mechanical properties depended non-linearly on composition, with hardness increasing from 3.5 GPa for a 0% cobalt film to a maximum of 4.5 GPa (24 at.% Co) and the Young’s modulus increasing from 118 GPa to 214 GPa, respectively. Four-point probe electrical measurements confirmed the expected linear increase in resistivity as Co content increased. Since electrical and mechanical properties have differing dependences on the film composition, an optimal alloy composition that balances an acceptable increase in resistance with improved mechanical properties could enable more reliable, low-temperature bonding solutions in advanced microelectronic devices.Keywords
Funding Information
- National Science Foundation (DMR-1808277)
This publication has 47 references indexed in Scilit:
- Enhanced thermal expansion with nanocrystalline Cu in SiO2 vias for hybrid bondingApplied Surface Science, 2024
- Spinodal Decomposition in Nanocrystalline AlloysActa Materialia, 2021
- Creep strength contribution due to precipitation hardening in copper–cobalt alloysJournal of Materials Science, 2018
- Phase separation of a supersaturated nanocrystalline Cu–Co alloy and its influence on thermal stabilityActa Materialia, 2015
- Grain boundary complexionsActa Materialia, 2014
- Modern Electroplating2010
- Diffusion Processes in Advanced Technological Materials2005
- Formation, solid solution hardening and softening of nanocrystalline solid solutions prepared by mechanical attritionActa Materialia, 1996
- Solid-solution hardeningJournal of Materials Science, 1993
- Hardening by spinodal modulated structureActa Metallurgica, 1980