Influence of nitrogen content on the thermal diffusivity of TiN films prepared by magnetron sputtering
Authors:
- 25 November 2019
- journal article
- research article
- Published by SAGE Publications in Surface Engineering
- Vol. 36 (2) , 192-198
Abstract
TiN films with various nitrogen content were deposited using reactive magnetron sputtering system and the influence of TiN film’s microstructure on thermal diffusivity was investigated. The results showed that the titanium nitride film with 40.6–64.0at.% N exhibited a single face-centered cubic (fcc) structure. The density of states calculations of TiNx showed that excess N atoms in TiN matrix weaken the Ti-N bonds. The thermal diffusivity of TiN thin films decreased gradually and reached a stable range with an increase of N content. The minimum thermal diffusivity value was 2.291×10−6m2/s at 60.2at.% N. This reduction of thermal diffusivity could be attribute to the films’ microstructure, including the increased grain boundaries due to the decrease of grain size, the change of preferential orientation and the increased lattice distortion.Keywords
This publication has 27 references indexed in Scilit:
- Temperature driven evolution of thermal, electrical, and optical properties of Ti–Al–N coatingsActa Materialia, 2012
- Effects of processing parameters on the properties of tantalum nitride thin films deposited by reactive sputteringJournal of Alloys and Compounds, 2008
- Effect of Ti interlayer on the residual stress and texture development of TiN thin filmsSurface and Coatings Technology, 2006
- Characterization of nano-structured TiN thin films prepared by R.F. magnetron sputteringMaterials Letters, 2005
- Mechanical characterization of reactively magnetron-sputtered TiN filmsSurface and Coatings Technology, 2003
- Physical and morphological characterization of reactively magnetron sputtered TiN filmsThin Solid Films, 2002
- The effect of substrate temperature and biasing on the mechanical properties and structure of sputtered titanium nitride thin filmsSurface and Coatings Technology, 2000
- Characterization of TiN films deposited onto stainless steel strips by continuous dry-coating processThin Solid Films, 1996
- Reactive-sputter-deposited TiN films on glass substratesThin Solid Films, 1991
- Mechanisms of reactive sputtering of titanium nitride and titanium carbide II: Morphology and structureThin Solid Films, 1983