Effects of Central Cut Width on the Dynamical Characteristics of Box Assembly Structure
Open Access
- 4 January 2025
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 15 (1) , 417
Abstract
An investigation into the Box Assembly with Removable Component (BARC) structure is conducted by utilizing computational simulations and experimental structural testing in order to determine the complex dynamical responses instigated by the central cut of the system. Because the dynamics of the BARC system is complex, this study focuses primarily on analyzing the behavior of the box assembly (BA) system. The investigation explores the dynamics of the BA system by varying the central cut widths, ranging from a cut as wide as 0.5” cut to a 0.25” cut system, as well as a 0.1” cut and a system with no cut at all. Experimental testing is performed on each system including a free vibration test using an impact hammer to excite and identify the dominant frequencies of each structure. This testing is followed by pseudo-random vibration tests and swept sinusoidal excitation tests to determine the nonlinear aspects of these systems, such as the possible existence of nonlinear softening, hardening, and/or damping. The results show that nonlinear softening and nonlinear damping are present in each system. The no-cut system demonstrated the highest peak frequencies throughout all the tests, being the most rigid structure. The 0.25” cut system was shown to have the highest peak frequencies among all the cut systems in both the finite elemenet analysis (FEA) and impact testing. This trend did not continue, though, in the random and harmonic testing, possibly due to the added stiffness of the test setup with the slip table and stinger. The results show the importance of accurately measuring the central cut width and how possible geometric uncertainties change the overall dynamical behaviors of complex systems, such as natural characteristics, nonlinear responses, coupling of modes, and oscillating amplitudes.Keywords
Funding Information
- Los Alamos National Laboratory (LANL)
This publication has 22 references indexed in Scilit:
- An energy‐frequency parameter for earthquake ground motion intensity measureEarthquake Engineering & Structural Dynamics, 2022
- Effects of test fixture connections and interference of the BARC structure on its dynamical responsesInternational Journal of Mechanical Sciences, 2022
- Main frequency band of blast vibration signal based on wavelet packet transformApplied Mathematical Modelling, 2019
- Interface reduction for Hurty/Craig-Bampton substructured models: Review and improvementsMechanical Systems and Signal Processing, 2019
- Integration of system identification and finite element modelling of nonlinear vibrating structuresMechanical Systems and Signal Processing, 2018
- Full-degrees-of-freedom frequency based substructuringMechanical Systems and Signal Processing, 2018
- Model Order Reduction for Linear and Nonlinear Systems: A System-Theoretic PerspectiveArchives of Computational Methods in Engineering, 2014
- A dual Craig–Bampton method for dynamic substructuringJournal of Computational and Applied Mathematics, 2004
- Hardening/softening behaviour in non-linear oscillations of structural systems using non-linear normal modesJournal of Sound and Vibration, 2004
- A hybrid method of component mode synthesisComputers & Structures, 1971