Modified Elastofiber Element for Steel Slender Column and Brace Modeling
- 1 November 2010
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 136 (11) , 1350-1366
Abstract
An efficient beam element, the modified elastofiber (MEF) element, has been developed to capture the overall features of the elastic and inelastic responses of slender columns and braces under axial cyclic loading without unduly heavy discretization. It consists of three fiber segments, two at the member ends and one at midspan, with two elastic segments sandwiched in between. The segments are demarcated by two exterior nodes and four interior nodes. The fiber segments are divided into 20 fibers in the cross section that run the length of the segment. The fibers exhibit nonlinear axial stress-strain behavior akin to that observed in a standard tension test of a rod in the laboratory, with a linear elastic portion, a yield plateau, and a strain-hardening portion consisting of a segment of an ellipse. All the control points on the stress-strain law are user defined. The elastic buckling of a member is tracked by updating both exterior and interior nodal coordinates at each iteration of a time step and check...Keywords
This publication has 28 references indexed in Scilit:
- Modeling Steel Frame Buildings in Three Dimensions. II: Elastofiber Beam Element and ExamplesJournal of Engineering Mechanics, 2006
- Modeling Steel Frame Buildings in Three Dimensions. I: Panel Zone and Plastic Hinge Beam ElementsJournal of Engineering Mechanics, 2006
- Plastic Hinge Integration Methods for Force-Based Beam–Column ElementsJournal of Structural Engineering, 2006
- Asymptotic-Numerical Method to Analyze the Postbuckling Behavior, Imperfection-Sensitivity, and Mode Interaction in FramesJournal of Engineering Mechanics, 2005
- Inelastic Cyclic Model for Steel BracesJournal of Engineering Mechanics, 2003
- Inelastic seismic response of steel bracing membersJournal of Constructional Steel Research, 2002
- Static and Dynamic Behavior of Steel Braces under Cyclic DisplacementJournal of Engineering Mechanics, 1998
- Beam-Column ModelingJournal of Engineering Mechanics, 1995
- An efficient simplified approach for the nonlinear buckling analysisof framesAIAA Journal, 1985
- A Parametric Postbuckling Analysis of an Asymmetric Two-Bar FrameJournal of Structural Mechanics, 1980