Modeling and simulation of moisture transfer during solar drying of carrot slices
- 28 October 2018
- journal article
- research article
- Published by Wiley in Journal of Food Process Engineering
- Vol. 41 (8)
Abstract
Carrot slices of 0.03 m diameter and 0.005 m thickness were dried in direct, indirect and mixed mode type natural convection solar dryers. Thin layer drying behavior of carrot slices was studied using 10 empirical and semi‐empirical mathematical models. Wang and Singh model described the drying behavior of carrot accurately with maximum values of coefficient of determination (R2) and minimum reduced chi‐square (χ2), and root mean square error (RMSE). The effective diffusivity (Deff) and convective mass transfer coefficient (hm) of carrot slices ranged from 2.59 × 10−8−6.36 × 10−8 m2/s and 3.15 × 10−7 to 4.28 × 10−7 m/s, respectively, with maximum values obtained for mixed mode solar dried samples followed by direct and indirect solar dried samples. The diffusivity of carrot slices dried in direct, indirect and mixed‐mode solar dryer were expressed as a function of temperature using Arrhenius relation. Finite element model was developed using COMSOL Multiphysics software to simulate moisture ratio during drying. The developed model predicted the transient moisture migration phenomenon inside the samples precisely during the drying process.Practical applications: The ever increasing worriment on climate change and growing demand for enactment of clean energy technologies in food industries is the motivation for investigating the solar drying behavior of carrot slices. It is well known that the physico‐chemical and sensorial changes during drying are very much dependent on the moisture content of food product. In this regard, proper understanding and controlling of the solar drying process by accurately predicting moisture distribution inside the product will result in superior quality dried products. Moreover, mathematical models will assist in predicting the drying behavior of food product by analyzing the influence of process parameters and will be helpful to minimize the cost of drying process and deterioration of quality attributes of the product. The use of solar dryers is a proven technology and the food industry should promote its practical applications in food processing sector.Keywords
This publication has 67 references indexed in Scilit:
- Mathematical model for heat and mass transfer during convective drying of pumpkinFood and Bioproducts Processing, 2017
- Effective moisture diffusivity during hot air solar drying of tomato slicesResearch in Agricultural Engineering, 2016
- Effective moisture diffusivity of pomegranate arils under going microwave-vacuum dryingJournal of Food Engineering, 2014
- Drying characteristics of garlic (Allium sativum L) slices in a convective hot air dryerHeat and Mass Transfer, 2014
- Modeling of Coupled Water Transport and Large Deformation During Dehydration of Apple TissueFood and Bioprocess Technology, 2012
- Measurement of Dielectric Properties and Finite Element Simulation of Microwave Pretreatment for Convective Drying of GrapesPIERS Online, 2009
- Influence of drying conditions on the effective moisture diffusivity, energy of activation and energy consumption during the thin-layer drying of berberis fruit (Berberidaceae)Energy Conversion and Management, 2008
- An analysis of the transport phenomena occurring during food drying processJournal of Food Engineering, 2007
- Influence of the drying conditions on the drying constants and moisture diffusivity during the thin-layer drying of figsJournal of Food Engineering, 2004
- Moisture diffusivity and drying kinetic equation of convective drying of grapesJournal of Food Engineering, 2002