Point by point femtosecond laser inscription of fibre and waveguide Bragg gratings for photonic device fabrication
- 1 April 2006
- conference paper
- Published by Laser Institute of America
- Vol. 2006 (1) , 360-362
Abstract
We present a flexible and rapid method for the production of Bragg gratings in a range of optical waveguides such as optical fibres and direct laser-written waveguides in bulk media. Using a low repetition rate (1 kHz) femtosecond laser, Bragg grating structures can be written in a point-by-point fashion (where each laser pulse inscribes one period of the Bragg structure) in both passive and active media be they fibre (FBG) or waveguide (WBG) based. Furthermore it is possible to control parameters such as the amplitude and chirp of the Bragg periods to create arbitrary reflection and transmission profiles. This technique can be coupled with existing fibre, rib waveguide and direct write waveguide technologies to create a range of photonic devices such as channel splitters, frequency combs, and signal amplifiers and conditioners for all-optical photonic signal processing. In initial tests 3 frequencies filter combs and Bragg grating reflectors with -53 dB insertion loss were written at arbitrary wavelengths in non-sensitised single mode fibre (SMF-28e) with process times between 30 and 90 seconds. These gratings are highly stable and withstand annealing to 600°C.Keywords
This publication has 5 references indexed in Scilit:
- Fiber Bragg grating inscription by high-intensity femtosecond UV laser light: comparison with other existing methods of fabricationJournal of the Optical Society of America B, 2005
- Slit beam shaping method for femtosecond laser direct-write fabrication of symmetric waveguides in bulk glassesOptics Express, 2005
- Direct writing of fibre Bragg gratings by femtosecond laserElectronics Letters, 2004
- Fiber Bragg gratings made with a phase mask and 800-nm femtosecond radiationOptics Letters, 2003
- Point-by-point fabrication of micro-Bragg gratings in photosensitive fibre using single excimer pulse refractive index modification techniquesElectronics Letters, 1993