Natural rubber with low heat generation achieved by the inclusion of boron carbide
- 4 August 2010
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 118 (4) , 2050-2055
Abstract
Natural rubber with low heat generation was prepared by the inclusion of boron carbide (B4C). Tensile testing, scanning electron microscopy (SEM), dynamic mechanical analysis, and thermal constant analysis were performed. The results show that a slight deterioration of tensile strength only occurred at a high volume content (>20 vol %). The thermal conductivity increased for the formation of well‐maintained B4C thermal conductive pathways. SEM images and theoretical analysis demonstrated that the specific area of B4C was small and the interfacial activity was low. Infrared thermal images taken by the infrared camera proved the low heat generation of the composites, which originated from the high thermal conductivity and the weak interface. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010Keywords
This publication has 27 references indexed in Scilit:
- A Method to Predict the Heat Generation in a Rubber Spring Used in the Railway IndustryProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2005
- Payne effect and shear elasticity of silica-filled polymers in concentrated solutions and in molten statePolymer, 2003
- Natural rubber composites as thermal neutron radiation shieldsPolymer Testing, 2002
- Hysteresis loss in filled rubber vulcanizates and its relationship with heat generationJournal of Applied Polymer Science, 1997
- Heat Generation in Elastomer Compounds: Causes and EffectsRubber Chemistry and Technology, 1991
- Effect of Carbon-Black Loading and Crosslink Density on the Heat Build-Up in ElastomersRubber Chemistry and Technology, 1991
- Dynamic Testing and Reinforcement of RubberRubber Chemistry and Technology, 1988
- Effect of Carbon Black on Dynamic Properties of Rubber VulcanizatesRubber Chemistry and Technology, 1978
- Low Strain Dynamic Properties of Filled RubbersRubber Chemistry and Technology, 1971
- Heat Generation in Flexed RubberIndustrial & Engineering Chemistry, 1943