Defect Passivation for Kesterite CZTSSe Solar Cells via In Situ Al2O3 Incorporation into the Bulk CZTSSe Absorber
Authors:
Abstract
A method for in situ Al2O3 incorporation into a Cu2ZnSn(S,Se)4 (CZTSSe) absorber and its effect on solar cell performance is reported. Al2O3‐incorporated CZTSSe films can be prepared by spraying a precursor solution containing Al metal salt dissolved together with Cu, Zn, and Sn metal salts and thiourea. X‐ray photoemission spectroscopy (XPS) and field‐emission transmission electron microscopy (FESEM) reveal the existence of an Al2O3 phase in the CZTSSe film. X‐ray diffraction (XRD) and Raman spectroscopy indicate that Al2O3 incorporation (Al: 0%–2%) does not have a noticeable effect on the crystallization process through postselenization and does not change the lattice parameters of the selenized CZTSSe. However, optimal Al2O3 incorporation is found to reduce the defect level and defect density, as confirmed by various characterization methods, such as 442 nm Raman spectroscopy, photoluminescence, admittance spectroscopy, and temperature‐dependent current density measurements. In addition, Al2O3 incorporation reduces the Urbach energy and back‐contact barrier height. Al2O3 incorporation is found to induce enhancement of Na and O concentrations in the absorber, which facilitates defect passivation effects. Owing to the observed beneficial effects of Al2O3 incorporation, the device performance is significantly enhanced, achieving a maximum power conversion efficiency of 11.76%.Keywords
Funding Information
- National Research Foundation of Korea (2016M1A2A2937010, 2021R1A2C1008598)
This publication has 28 references indexed in Scilit:
- Impact of Nanoscale Elemental Distribution in High‐Performance Kesterite Solar CellsAdvanced Energy Materials, 2015
- Influence of compositionally induced defects on the vibrational properties of device grade Cu2ZnSnSe4 absorbers for kesterite based solar cellsApplied Physics Letters, 2015
- Employing Si solar cell technology to increase efficiency of ultra‐thin Cu(In,Ga)Se2 solar cellsProgress in Photovoltaics: Research and Applications, 2014
- Device Characteristics of CZTSSe Thin‐Film Solar Cells with 12.6% EfficiencyAdvanced Energy Materials, 2013
- Defect formation in Cu(In,Ga)Se2 thin films due to the presence of potassium during growth by low temperature co-evaporation processJournal of Applied Physics, 2013
- Status and prospects of Al2O3-based surface passivation schemes for silicon solar cellsJournal of Vacuum Science & Technology A, 2012
- Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cellsApplied Physics Letters, 2010
- Surface passivation of high‐efficiency silicon solar cells by atomic‐layer‐deposited Al2O3Progress in Photovoltaics: Research and Applications, 2008
- Structure, optical and electrical properties of ZnSe thin filmsPhysica B: Condensed Matter, 2005
- Thin‐film solar cells: device measurements and analysisProgress in Photovoltaics: Research and Applications, 2004