Design, Fabrication, and Performance Test of a 100-W Helical-Blade Vertical-Axis Wind Turbine at Low Tip-Speed Ratio
Open Access
Abstract
A 100-W helical-blade vertical-axis wind turbine was designed, manufactured, and tested in a wind tunnel. A relatively low tip-speed ratio of 1.1 was targeted for usage in an urban environment at a rated wind speed of 9 m/s and a rotational speed of 170 rpm. The basic dimensions were determined through a momentum-based design method according to the IEC 61400-2 protocol. The power output was estimated by a mathematical model that takes into account the aerodynamic performance of the NACA0018 blade shape. The lift and drag of the blade with respect to the angle of attack during rotation were calculated using 2D computational fluid dynamics (CFD) simulation to take into account stall region. The average power output calculated by the model was 108.34 W, which satisfies the target output of 100 W. The manufactured wind turbine was tested in a large closed-circuit wind tunnel, and the power outputs were measured for given wind speeds. At the design condition, the measured power output was 114.7 W, which is 5.9% higher than that of the mathematical model. This result validates the proposed design method and power estimation by the mathematical model.Keywords
Funding Information
- National Research Foundation of Korea (No. 2011-0030013)
This publication has 25 references indexed in Scilit:
- CFD study on aerodynamic power output of a 110 kW building augmented wind turbineEnergy and Buildings, 2016
- Effect of the wind direction on the near wake structures of an Archimedes spiral wind turbine bladeJournal of Visualization, 2016
- Experimental and Numerical Study of the Aerodynamic Characteristics of an Archimedes Spiral Wind Turbine BladeEnergies, 2014
- CFD Study on Aerodynamic Power Output Changes with Inter-Turbine Spacing Variation for a 6 MW Offshore Wind FarmEnergies, 2014
- Environmental impacts of micro-wind turbines and their potential to contribute to UK climate change targetsEnergy, 2013
- Numerical study on the horizontal axis turbines arrangement in a wind farm: Effect of separation distance on the turbine aerodynamic power outputJournal of Wind Engineering and Industrial Aerodynamics, 2013
- Aerodynamic models for Darrieus-type straight-bladed vertical axis wind turbinesRenewable and Sustainable Energy Reviews, 2008
- Evaluation of wind energy potential and electricity generation on the coast of Mediterranean Sea in EgyptRenewable Energy, 2006
- Technical and economic aspects of a floating offshore wind farmJournal of Wind Engineering and Industrial Aerodynamics, 1998
- Double-multiple streamtube model for studying vertical-axis wind turbinesJournal of Propulsion and Power, 1988