Abstract
This study investigated the effects of Sb content on the electrical characteristics, bias-illumination stability, and trap density of states (DOS). Accordingly, thin-film transistors (TFTs) were fabricated using Sb-doped InGaSnO (IGTO) as the channel layer. Devices with Sb contents ranging from 0 to 7 at.% were prepared, and a comparison of their transfer characteristics confirmed that Sb doping significantly influenced the charge transport properties and stability of IGTO. In particular, the TFT with Sb 1 at.% doping exhibited a field-effect mobility of 32.8 cm2/Vs, representing an approximately 53% improvement over that of undoped IGTO, whereas the threshold voltage improved from -5.70 V to -2.55 V. The device doped with 3 at.% Sb achieved excellent bias-illumination stability, corresponding to a voltage shift of 3.09 V after the application of negative bias illumination stress (NBIS) for 5000 s. In addition, DOS values calculated using photo-excited charge collection spectroscopy revealed that the maximum trap density of undoped IGTO in the 650–530 nm wavelength region was 9.0 × 1011 eV-1∙cm-2, whereas it decreased to 4.5 × 1011 eV-1∙cm-2 or lower for IGTO doped with 3 at.% Sb. This reduction in DOS was consistent with the trend of the NBIS-induced negative shift under 530 nm illumination. According to X-ray photoelectron spectroscopy analysis, Sb may exist in the film in two oxidation states, and at low Sb content, a higher Sb5+/Sb3+ ratio was obtained, indicating that appropriate Sb doping could enhance device stability.

This publication has 26 references indexed in Scilit: