Analysis of gas holdup and bubble behavior in a biopolymer solution inside a bioreactor using tomography and dynamic gas disengagement techniques
- 3 August 2017
- journal article
- research article
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 93 (2) , 340-349
Abstract
BACKGROUND: The interfacial mass transfer rate in an aerated system vessel in which the liquid phase is in contact with the gas phase is closely related to the interfacial area between two phases. The gas–liquid interfacial area strongly depends on the bubble size, bubble size distribution, and the gas holdup. For the first time, in this study the performance of the ASI impeller was assessed by determining the bubble classes, bubble size distribution, local gas holdup, and global gas holdup in an aerated mixing system containing a highly viscous and non‐Newtonian biopolymer solution. The effects of the volumetric gas flow, impeller speed, and fluid rheology on the gas dispersion attained by the ASI impeller were investigated.RESULTS: Electrical resistance tomography (ERT) was coupled with the dynamic gas disengagement (DGD) technique to determine the bubble classes, to measure the gas holdup, and to calculate the Sauter mean bubble diameter. The performance of the ASI impeller was compared with those of the pitched blade turbine and the Rushton impeller in terms of the bubble size distribution and gas holdup. The experimental data revealed that three classes of bubbles were formed within the aerated system. An empirical correlation for the gas holdup as a function of the gas flow number and apparent viscosity of fluid was developed for the aerated mixing tank equipped with the ASI impeller.CONCLUSION: The ASI impeller effectively enhanced the breakage of the bubbles and gas holdup at the higher gas flow rates in a yield‐pseudoplastic fluid. © 2017 Society of Chemical IndustryKeywords
This publication has 28 references indexed in Scilit:
- On the measurement of local gas hold-up, interfacial area and bubble size distribution in gas–liquid contactors via light sheet and image analysis: Imaging technique and experimental resultsChemical Engineering Science, 2013
- Local gas and liquid phase velocity measurement in a miniature stirred vessel using PIV combined with a new image processing algorithmExperimental Thermal and Fluid Science, 2009
- Mass transfer correlations for multiple-impeller gas–liquid contactors. Analysis of the effect of axial dispersion in gas and liquid phases on “local” values measured by the dynamic pressure method in individual stages of the vesselChemical Engineering Science, 2007
- Experimental and numerical study of gas hold-up in surface aerated stirred tanksChemical Engineering Science, 2006
- Studies in multiple impeller agitated gas–liquid contactorsChemical Engineering Science, 2006
- Analysis of gas holdup in bubble columns with non-Newtonian fluid using electrical resistance tomography and dynamic gas disengagement techniqueChemical Engineering Science, 2005
- Liquid Homogenization in Aerated Multi-Impeller Stirred VesselChemical Engineering & Technology, 2000
- Detecting filter-cake pathologies in solid–liquid filtration: semi-tech scale demonstrations using electrical resistance tomography (ERT)Chemical Engineering Journal, 2000
- Power, gas dispersion and homogenisation characteristics of Scaba SRGT and rushton turbine impellers.JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1992
- A capillary suction prove for bubble size measurementMeasurement Science and Technology, 1991